Korg HDR-TRI manual Press the OK button to execute formatting

Page 8

Settings for recording

If you are using only a single hard disk to perform hard disk recording, you must specify a ﬁler partition larger than 0 in order to create an area where .SNG ﬁles and .PCG ﬁles etc. can be saved. If you are using two or more hard disks, a ﬁler partition must be created on at least one of the disks.

5Press the OK button to execute formatting.

Formatting a hard disk will require a certain amount of time depending on the size of the hard disk. (e.g., formatting a 540 Mbyte hard disk requires approxi- mately 5 minutes.)

After formatting has been executed, pressing the [COMPARE] key will not restore the original state of the disk.

Do not install a hard disk that was formatted on the TRINITY series into another computer. Korg cannot guarantee the operation of such a disk.

Types of SCSI devices that can be connected and their ID settings

SCSI devices other than hard disks can also be connected, including removable media such as magneto-optical disks (MO).

Hard disks can be set freely to any ID number 0–6, but a removable media device can be used only when its ID number is set to 6.

If you have connected only one removable media device, and no other device is connected, that removable media can be used to load and save .SNG ﬁles. However if one or more hard disks are also connected in addition to the remov- able media device, the hard disk(s) will be able to record sound and load/save

.SNG ﬁles, but the removable media device will not be able to record sounds nor load/save .SNG ﬁles. The removable media device will be usable only for oper- ations such as “Copy with Sound” (☞ page 52 of this manual) or “Copy”

(☞ page 47 of this manual).

Introduction

Operation

Parameters

Appendix

5

Image 8

Contents HDR-TRI Table of Contents Table of Contents Features of the HDR-TRI About hard disk recordingAbout hard disks About sound and audio eventsSettings for recording Hard disk connections and settingsTurn the power OFF for the Trinity and the hard disks On the hard disk, set an ID number in the rangeFormatting a hard disk Specify the size 0-540 Mbyte of the ﬁler partitionPress the OK button to execute formatting Connections for recording OutputinputSong settings Track ﬁeld, select the audio tracks that you wish to recordChecking the external input Example of connected device Recording Recording an audio trackPress the REC/WRITE key Press the START/STOP keyTo stop recording, press the START/STOP key Track setting, select AT3&4Compare function Playing back the tracks you recorded Adjusting the pan or volume balance of the tracksPlayback Recording mixer events Re-recording Using the rehearsal functionUsing auto punch-in recording to edit Track bouncing ping-pong recording EditingCreating repetitions of the same phrase Access the P8 tab 1 page Master FX Bouncing Midi tracks and audio tracks togetherApplying master effects Set Pan to R127 for audio tracksCreating a song in conjunction with the Midi sequencer Creating a song in conjunction with the Midi sequencerWhen you ﬁnish recording, press the START/STOP key Access the Sequencer mode P1 tab 5 page MixA1-4Loading data from a hard disk Saving/loading recorded dataSaving song data to a hard disk Using a recorded sound more than once in the same .SNG ﬁle Creating different arrangements using the same vocalUsing the same sound more than once Execute the page menu command Load Selected5c Tempo/Tempo Mode Tempo ModeAudio Track Rec Menu5e Meter/Metronome/Resolution/Multi Rec/Remove Data Multi Rec5f Take 5g Take Number5h Rehearsal 5i Input Select Analog, Digital5j Input Level 5l Audio Track Name Display+4 dBu, -10 dBu, -30 dBu ∞ ...+18 dB5D Rec HD Select 5m Monitor Mode SelectMenu Command Mix Audio Track 6f EQ Equalizer6g Send1/Send2 127 6h Pan Panpot6i Volume 100...127 6j Mix Audio Track Mode MANUAL/READ/MUTE/SOLO/WRITEWhen Solo is selected for one audio track When Solo is selected for two or more audio tracks6E Volume Pairing 6D Rec HD Select7h Recording Setup Preference5c Delay Samples/0...5 ms Audio Track parameter Audio TrackAudio Track Edit 3i Start Measure/End MeasureStart Measure 999 End Measure 9993B Automation Edit Insert button Delete buttonCopy button Audition Start/Stop button3E Erase Measure 3C Erase Audio Track3D Copy Audio Track Introduction Operation Parameters 3F Delete Measure3G Insert Measure 3H Copy Measure 3I Move Measure Trimming an audio event 3J Audio Event EditTrim button Audition buttons Audio TrackLocation/Sound name Audition ParametersTrim Parameters Executing the trim operationInserting an audio event Moving an audio eventDeleting an audio event Copying an audio eventStart/stop audition Audio Track Name 4j Audio Track Name4F Delete Measure 4G Insert Measure4H Copy Measure 4I Move MeasureLoad 1B Load Selected3C Copy Utility3B Rename 3G Format 3H WipeIntroduction Operation Parameters Appendix 4B Backup to DAT Audio Utility4C Restore from DAT 4D Copy with Sound 4E Disp Used Sound List4F Delete Unused Sound Disk P1 Appendix Error in wiping medium Disk not formattedMemory full. Audio track can’t play to the end No unused sounds foundSpeciﬁcations Godzilla Wants my Trinity