Playback
Playback
Playing back the track(s) you recorded
1Press the [RESET] key to return to the beginning of the song.
2Press the [START/STOP] key.
The audio that was recorded will be played back.
Adjusting the pan or volume balance of the tracks
You can adjust the pan and volume of each track so that the recorded tracks are played back in an appropriate balance. You can also use the equalizer to adjust the tone of each track.
1Access the Sequencer mode P1 tab 6 page
4
21
2Set the Mix Audio Track Mode to MANUAL for the audio tracks that have already been recorded.
3Press the [RESET] key to return to the beginning of the song, and press the [START/ STOP] key.
Playback will begin.
4Use the Pan/Volume settings to adjust the pan and volume of each track, and use EQ to adjust the tone.
5When you are finished, press the [START/STOP] key.
12