Korg HDR-TRI manual Creating a song in conjunction with the Midi sequencer

Page 20

Creating a song in conjunction with the MIDI sequencer

2 levels.

If you check the check box located at the left of the display, the right side output of effect 1 will be sent to effect 2, and effects 1 and 2 will be mixed. Refer to the Parameter Guide for details on the P8 tab 1 page (Master FX), and to the Effect Guide for an explanation of the settings of the master effects.

Creating a song in conjunction with the MIDI sequencer

This section explains how to record a vocal on audio track 1 to the accompani- ment of the MIDI sequencer.

Recording the vocal

1Access the Sequencer mode P1 tab 5 page (ATrkRec).

2

3

4

5

6

1

2In the Song ﬁeld, select the song that will provide the accompaniment.

3For the Track setting, select the desired audio track (AT1 in this example).

Make sure that the Audio Track Display shows the selected audio track.

4If you wish to hear the metronome as you record, set Metronome to On or Rec (to hear it only during recording), and make Metronome settings for Precount, Out- put, and Level in the tab 7 page (Preference).

With a metronome Output setting of L, L+R, or R, the metronome sound will be output from the headphone jack and from output jacks 1/L/MONO and 2/R. With a metronome Output setting of Send 1, Send 1+2, or Send 2, the metro- nome sound will be output from output jacks 3 and 4.

5In the Take ﬁeld, assign a take name.

6If you want a number to be added at the end of the take name to distinguish takes, check the Take No. box.

Checking the external input

7Access the Sequencer mode P1 tab 5 page (ATrkRec).

8Set the Input Select to Analog.

9For the Input Level, select a level appropriate for the device that is connected (–10 dBu) for this example, and sing into the mic while you adjust the Rec Level so that the meter does not go all the way.

If the Input Level indicates Overload, the input level is too high. If this occurs,

Introduction

Operation

Parameters

Appendix

17

Image 20

Contents HDR-TRI Table of Contents Table of Contents Features of the HDR-TRI About hard disk recordingAbout hard disks About sound and audio eventsSettings for recording Hard disk connections and settingsTurn the power OFF for the Trinity and the hard disks On the hard disk, set an ID number in the rangeFormatting a hard disk Specify the size 0-540 Mbyte of the ﬁler partitionPress the OK button to execute formatting Connections for recording OutputinputSong settings Track ﬁeld, select the audio tracks that you wish to recordChecking the external input Example of connected device Recording Recording an audio trackPress the REC/WRITE key Press the START/STOP keyTo stop recording, press the START/STOP key Track setting, select AT3&4Compare function Playing back the tracks you recorded Adjusting the pan or volume balance of the tracksPlayback Recording mixer events Re-recording Using the rehearsal functionUsing auto punch-in recording to edit Track bouncing ping-pong recording EditingCreating repetitions of the same phrase Access the P8 tab 1 page Master FX Bouncing Midi tracks and audio tracks togetherApplying master effects Set Pan to R127 for audio tracksCreating a song in conjunction with the Midi sequencer Creating a song in conjunction with the Midi sequencerWhen you ﬁnish recording, press the START/STOP key Access the Sequencer mode P1 tab 5 page MixA1-4Loading data from a hard disk Saving/loading recorded dataSaving song data to a hard disk Using a recorded sound more than once in the same .SNG ﬁle Creating different arrangements using the same vocalUsing the same sound more than once Execute the page menu command Load Selected5c Tempo/Tempo Mode Tempo ModeAudio Track Rec Menu5e Meter/Metronome/Resolution/Multi Rec/Remove Data Multi Rec5f Take 5g Take Number5h Rehearsal 5i Input Select Analog, Digital5j Input Level 5l Audio Track Name Display+4 dBu, -10 dBu, -30 dBu ∞ ...+18 dB5D Rec HD Select 5m Monitor Mode SelectMenu Command Mix Audio Track 6f EQ Equalizer6g Send1/Send2 127 6h Pan Panpot6i Volume 100...127 6j Mix Audio Track Mode MANUAL/READ/MUTE/SOLO/WRITEWhen Solo is selected for one audio track When Solo is selected for two or more audio tracks6E Volume Pairing 6D Rec HD Select7h Recording Setup Preference5c Delay Samples/0...5 ms Audio Track parameter Audio TrackAudio Track Edit 3i Start Measure/End MeasureStart Measure 999 End Measure 9993B Automation Edit Insert button Delete buttonCopy button Audition Start/Stop button3E Erase Measure 3C Erase Audio Track3D Copy Audio Track Introduction Operation Parameters 3F Delete Measure3G Insert Measure 3H Copy Measure 3I Move Measure Trimming an audio event 3J Audio Event EditTrim button Audition buttons Audio TrackLocation/Sound name Audition ParametersTrim Parameters Executing the trim operationInserting an audio event Moving an audio eventDeleting an audio event Copying an audio eventStart/stop audition Audio Track Name 4j Audio Track Name4F Delete Measure 4G Insert Measure4H Copy Measure 4I Move MeasureLoad 1B Load Selected3C Copy Utility3B Rename 3G Format 3H WipeIntroduction Operation Parameters Appendix 4B Backup to DAT Audio Utility4C Restore from DAT 4D Copy with Sound 4E Disp Used Sound List4F Delete Unused Sound Disk P1 Appendix Error in wiping medium Disk not formattedMemory full. Audio track can’t play to the end No unused sounds foundSpeciﬁcations Godzilla Wants my Trinity