Korg HDR-TRI Settings for recording, Hard disk connections and settings, Terminate the hard disk

Page 6

Settings for recording

2. Operation

Settings for recording

This section explains how to make the necessary settings for hard disk record- ing. Be sure to make these settings before performing hard disk recording.

Hard disk connections and settings

Up to 7 hard disks can be connected using SCSI cables. Use hard disks with a maximum capacity of 4 Gbytes and an average seek time of 11.5 ms or less. The TRINITY uses a D-Sub25-pinconnector. The connectors of different hard disks may vary, so read the manual of your hard disk to check the type of con- nector it has before purchasing an appropriate SCSI cable.

1Turn the power OFF for the TRINITY and the hard disk(s).

The power of the TRINITY and any hard disk(s) must be OFF before con- necting or disconnecting SCSI cables or changing the ID number of a hard disk.

2On the hard disk, set an ID number in the range of 0–6.

If you are connecting two or more hard disks, set them to different ID numbers so that they can be distinguished.

For details on setting the ID number, refer to the manual for your hard disk.

Setting two or more hard disks to the same ID will cause malfunctions or loss of data.

3Connect the SCSI connector of the TRINITY to the SCSI connector of the hard disk.

If you are connecting two or more hard disks, make sure that the total length of the cables is less than 6 meters (18 feet).

4Terminate the hard disk.

If two or more hard disks are connected, terminate the last hard disk in the chain (the hard disk furthest from the TRINITY).

Even if only one hard disk is connected, that hard disk must be terminated. Some hard disks require an externally attached terminator. Others have a swit- chable terminator built-in. Refer to the manual for your hard disk.

Total length of SCSI cables must be less than 6 meters (18 feet)

SCSI	SCSI	SCSI	SCSI	SCSI
	ID0		ID1	ID2
Hard Disk		Hard Disk		Hard Disk

Hard disk must be terminated

Introduction

Operation

Parameters

Appendix

3

Image 6

Contents HDR-TRI Table of Contents Table of Contents Features of the HDR-TRI About hard disk recordingAbout hard disks About sound and audio eventsTurn the power OFF for the Trinity and the hard disks Settings for recordingHard disk connections and settings On the hard disk, set an ID number in the rangeFormatting a hard disk Specify the size 0-540 Mbyte of the ﬁler partitionPress the OK button to execute formatting Connections for recording OutputinputSong settings Track ﬁeld, select the audio tracks that you wish to recordChecking the external input Example of connected device Press the REC/WRITE key RecordingRecording an audio track Press the START/STOP keyTrack setting, select AT3&4 Compare functionTo stop recording, press the START/STOP key Adjusting the pan or volume balance of the tracks PlaybackPlaying back the tracks you recorded Recording mixer events Using the rehearsal function Using auto punch-in recording to editRe-recording Editing Creating repetitions of the same phraseTrack bouncing ping-pong recording Applying master effects Access the P8 tab 1 page Master FXBouncing Midi tracks and audio tracks together Set Pan to R127 for audio tracksCreating a song in conjunction with the Midi sequencer Creating a song in conjunction with the Midi sequencerWhen you ﬁnish recording, press the START/STOP key Access the Sequencer mode P1 tab 5 page MixA1-4Saving/loading recorded data Saving song data to a hard diskLoading data from a hard disk Using the same sound more than once Using a recorded sound more than once in the same .SNG ﬁleCreating different arrangements using the same vocal Execute the page menu command Load SelectedAudio Track Rec 5c Tempo/Tempo ModeTempo Mode Menu5e Meter/Metronome/Resolution/Multi Rec/Remove Data Multi Rec5h Rehearsal 5f Take5g Take Number 5i Input Select Analog, Digital+4 dBu, -10 dBu, -30 dBu 5j Input Level5l Audio Track Name Display ∞ ...+18 dB5m Monitor Mode Select Menu Command5D Rec HD Select 6g Send1/Send2 127 Mix Audio Track6f EQ Equalizer 6h Pan PanpotWhen Solo is selected for one audio track 6i Volume 100...1276j Mix Audio Track Mode MANUAL/READ/MUTE/SOLO/WRITE When Solo is selected for two or more audio tracks6E Volume Pairing 6D Rec HD Select7h Recording Setup Preference5c Delay Samples/0...5 ms Audio Track parameter Audio TrackStart Measure 999 Audio Track Edit3i Start Measure/End Measure End Measure 9993B Automation Edit Copy button Insert buttonDelete button Audition Start/Stop button3C Erase Audio Track 3D Copy Audio Track3E Erase Measure Introduction Operation Parameters 3F Delete Measure3G Insert Measure 3H Copy Measure 3I Move Measure 3J Audio Event Edit Trim buttonTrimming an audio event Location/Sound name Audition buttonsAudio Track Audition ParametersTrim Parameters Executing the trim operationDeleting an audio event Inserting an audio eventMoving an audio event Copying an audio eventStart/stop audition Audio Track Name 4j Audio Track Name4H Copy Measure 4F Delete Measure4G Insert Measure 4I Move MeasureLoad 1B Load SelectedUtility 3B Rename3C Copy 3G Format 3H WipeIntroduction Operation Parameters Appendix 4B Backup to DAT Audio Utility4C Restore from DAT 4D Copy with Sound 4E Disp Used Sound List4F Delete Unused Sound Disk P1 Appendix Memory full. Audio track can’t play to the end Error in wiping mediumDisk not formatted No unused sounds foundSpeciﬁcations Godzilla Wants my Trinity