Radio Shack 32-2057 quick start Beyond the Basics Sound check

Page 12

Beyond the Basics

sound check

1.Select an input source to play.

2.Adjust its volume (CH control) to its preset signal level (see “presetting input signal levels” on Page 9). The mixer’s LED meters should read 0dB or less.

3.Adjust your receiver/amplifier’s volume to an appropriate level for the location or event where the mixer will be used.

4.Adjust the LEFT CHANNEL and RIGHT CHANNEL frequency controls to your preference (see “using the seven band equalizer” on page 15). If this causes the LED meters to exceed 0dB, adjust MASTER downward until their readings return to 0dB. Adjust your output device’s volume accordingly.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents What’s included Channel Stereo Sound MixerContents Important Safety Instructions Basics Basics Setting up your mixer Connecting outputsBasics Connecting inputs Connecting powerBasics Connecting a lamp and headphones Listening safelyUsing your mixer Presetting input signal levelsBasics Presetting audio input sources Presetting the microphone Set OFF/ON/TALKOVER to OFFBeyond the Basics Sound check Mixing your inputs Beyond the BasicsPlaying an input source Switching to a second input source Beyond the Basics Monitoring a second input sourceUsing a microphone Using talkoverUsing the seven band equalizer Left ChannelFrequently asked questions Service and repair Replacing the fuse CareSpecifications Input Sensitivity/ImpedanceAccessories Limited one-year warranty
Top Page Image Contents