Radio Shack 32-2057 quick start Using a microphone, Using talkover

Page 15

Beyond the Basics

using a microphone

Your mixer has a set of tone controls for the microphone so you can tailor its high and low frequency sounds.

1.For regular sound, leave MIC TREBLE and MIC BASS set to 0.

2.Rotate MIC TREBLE toward +10 to increase, or toward –10to decrease high frequency sounds.

3.Rotate MIC BASS toward +10 to increase, or toward –10to decrease low frequency sounds.

MIC TREBLE

MIC BASS

using talkover

When you are not using your microphone, set OFF/ON/TALKOVER to OFF. The microphone’s input is turned off and all other audio input sources are unaffected.

1.To use your microphone, set OFF/ON/TALKOVER to ON. The microphone sound is mixed equally with the other audio input sources.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Channel Stereo Sound Mixer What’s includedContents Important Safety Instructions Basics Basics Connecting outputs Setting up your mixerConnecting power Basics Connecting inputsListening safely Basics Connecting a lamp and headphonesPresetting input signal levels Using your mixerBasics Presetting audio input sources Set OFF/ON/TALKOVER to OFF Presetting the microphoneBeyond the Basics Sound check Mixing your inputs Beyond the BasicsPlaying an input source Beyond the Basics Monitoring a second input source Switching to a second input sourceUsing talkover Using a microphoneLeft Channel Using the seven band equalizerFrequently asked questions Care Service and repair Replacing the fuseInput Sensitivity/Impedance SpecificationsLimited one-year warranty Accessories
Top Page Image Contents