Radio Shack 32-2057 quick start Basics Connecting a lamp and headphones, Listening safely

Page 8

The Basics

connecting a lamp and headphones

12V/3W MAX LAMP — connect a 12V DC/3W BNC lamp (not supplied) to light up the mixer’s controls.

PHONES — connect a pair of stereo headphones (not supplied) with a 1/4-inch (6.35 mm) plug. You can then listen and locate a section of music to mix.

listening safely

Do not listen at extremely high volume levels. Extended, high-volume listening can lead to permanent hearing loss.

To protect your hearing when using headphones, always follow these guidelines to set the listening volume:

•Set CUE LEVEL (headphones volume) to minimum before putting on your headphones.

•After you put on the headphones, adjust CUE LEVEL to a comfortable listening level. Do not increase the CUE LEVEL setting. Over time, your ears adapt to the volume level.

Image 8

Contents What’s included Channel Stereo Sound MixerContents Important Safety Instructions Basics Basics Setting up your mixer Connecting outputsBasics Connecting inputs Connecting powerBasics Connecting a lamp and headphones Listening safelyUsing your mixer Presetting input signal levelsBasics Presetting audio input sources Presetting the microphone Set OFF/ON/TALKOVER to OFFBeyond the Basics Sound check Playing an input source Mixing your inputsBeyond the Basics Switching to a second input source Beyond the Basics Monitoring a second input sourceUsing a microphone Using talkoverUsing the seven band equalizer Left ChannelFrequently asked questions Service and repair Replacing the fuse CareSpeciﬁcations Input Sensitivity/ImpedanceAccessories Limited one-year warranty