Radio Shack 32-2057 quick start Using the seven band equalizer, Left Channel

Page 16

Beyond the Basics

2.Set OFF/ON/TALKOVER to TALKOVER so that the microphone’s sound is louder than the other audio input sources. This is useful for paging.

using the seven band equalizer

The seven band equalizer controls, LEFT CHANNEL and RIGHT CHANNEL, further tailor the frequency for CH 1 (PHONO1, LINE 1), CH 2 (PHONO2, LINE 2), and CH 3 (LINE 3, LINE 4) to match your acoustic surroundings or to suit your personal preference.

LEFT CHANNEL

RIGHT CHANNEL

EQ

1.To activate the equalizer, press EQ. The EQ LED lights.

2.Slide the LEFT CHANNEL and RIGHT CHANNEL controls for a selected frequency to +12dB to boost, or toward –12dBto cut the frequency’s sound.

To provide smooth frequency control, the equalizer’s controls must overlap slightly. Thus, the 1K control has a slight effect on the range of frequencies covered by the 400Hz and 2.4K controls.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents What’s included Channel Stereo Sound MixerContents Important Safety Instructions Basics Basics Setting up your mixer Connecting outputsBasics Connecting inputs Connecting powerBasics Connecting a lamp and headphones Listening safelyUsing your mixer Presetting input signal levelsBasics Presetting audio input sources Presetting the microphone Set OFF/ON/TALKOVER to OFFBeyond the Basics Sound check Beyond the Basics Mixing your inputsPlaying an input source Switching to a second input source Beyond the Basics Monitoring a second input sourceUsing a microphone Using talkoverUsing the seven band equalizer Left ChannelFrequently asked questions Service and repair Replacing the fuse CareSpecifications Input Sensitivity/ImpedanceAccessories Limited one-year warranty
Top Page Image Contents