Care, Service and repair Replacing the fuse

Beyond the Basics

care

Keep the mixer dry; if it gets wet, wipe it dry immediately. Use and store the mixer only in room temperature environments. Handle the mixer carefully; do not drop it. Keep the mixer away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

service and repair

If your mixer is not performing as it should, take it to your local RadioShack store for assistance. To locate your nearest RadioShack, use the store locator feature on RadioShack’s website (www.radioshack.com), or call 1-800-The Shack (843-7422) and follow the menu options. Modifying or tampering with the mixer’s internal components can cause a malfunction and might invalidate its warranty.

replacing the fuse

The mixer uses a fuse for protection against surges and short circuits. If the mixer suddenly turns off and will not turn on, check the fuse. If necessary, replace it with a 0.5-amp, 250- volt, fast-acting, 11/4 x 1/4 inch fuse (not supplied).

1.	Disconnect power from
	the mixer.
2.	Use a Philips screwdriver	
	to remove the fuse
	to remove the fuse

compartment cap.

3.Remove the old fuse and insert a new one. Make sure you replace the fuse only with another fuse of the same type and rating.

4.Replace the fuse compartment cap.

5.Reconnect the mixer to power.