Radio Shack 32-2057 quick start Setting up your mixer, Connecting outputs

Page 6

The Basics

setting up your mixer

A sudden high output from the mixer could damage your hearing or damage the audio devices connected to your mixer. Before connecting to AC power, turn off your mixer and all audio devices connected to your mixer.

connecting outputs

OUTPUT REC L/R — use an audio patch cord (not supplied) to connect your tape deck’s line input jacks to your mixer (match left to left, right to right). You can then record the mixer’s output.

OUTPUT AMP L/R — use an audio patch cord (not supplied) to connect your receiver or ampliﬁer to your mixer (match left to left, right to right). The sound is output to your stereo sound system.

6

Image 6

Contents What’s included Channel Stereo Sound MixerContents Important Safety Instructions Basics Basics Setting up your mixer Connecting outputsBasics Connecting inputs Connecting powerBasics Connecting a lamp and headphones Listening safelyUsing your mixer Presetting input signal levelsBasics Presetting audio input sources Presetting the microphone Set OFF/ON/TALKOVER to OFFBeyond the Basics Sound check Mixing your inputs Beyond the BasicsPlaying an input source Switching to a second input source Beyond the Basics Monitoring a second input sourceUsing a microphone Using talkoverUsing the seven band equalizer Left ChannelFrequently asked questions Service and repair Replacing the fuse CareSpeciﬁcations Input Sensitivity/ImpedanceAccessories Limited one-year warranty