Radio Shack 32-2057 quick start Basics Connecting inputs, Connecting power

Page 7

The Basics

connecting inputs

MIC — connect a microphone with a 1/4-inch plug here (not supplied).

PHONO 1/2 — connect up to two low-level audio sources (turntable) to your mixer. If you connect

amagnetic-cartridge turntable, connect its ground wire (usually black or green) to GND.

GND

LINE 1, 2, 3, 4 — connect line level inputs from up to four audio sources to your mixer. Do not connect audio sources with line-level outputs to the PHONO 1 or PHONO 2 input jacks.

connecting power

Connect the mixer’s power cord to a standard AC outlet.

7

Image 7

Contents Channel Stereo Sound Mixer What’s includedContents Important Safety Instructions Basics Basics Connecting outputs Setting up your mixerConnecting power Basics Connecting inputsListening safely Basics Connecting a lamp and headphonesPresetting input signal levels Using your mixerBasics Presetting audio input sources Set OFF/ON/TALKOVER to OFF Presetting the microphoneBeyond the Basics Sound check Beyond the Basics Mixing your inputsPlaying an input source Beyond the Basics Monitoring a second input source Switching to a second input sourceUsing talkover Using a microphoneLeft Channel Using the seven band equalizerFrequently asked questions Care Service and repair Replacing the fuseInput Sensitivity/Impedance SpeciﬁcationsLimited one-year warranty Accessories