Frequently asked questions

Q - I set up my mixer according to the instructions. Why isn’t it working?

A- Make sure you are connected to a “live” AC outlet.

-Verify that all sources are securely connected.

-Check the fuse and replace it if needed.

Q - Why is there no signal from my input source?

A- Make sure OFF/ON/TALKOVER is not set to TALKOVER.

-Make sure the input source is turned on.

-Check the mixer and source control settings.

-Check connections between the mixer and input source.

Q - Why do I hear a humming noise from the PHONO source?

A - Make sure the PHONO 1 or PHONO 2 source’s ground wire is connected to the mixer’s GND terminal.

Q - Why do I hear a humming noise from another input source?

A - Make sure there are no low-level inputs connected to the mixer’s LINE input jacks.

Q - Why am I getting microphone feedback (squealing)?

A - Move the microphone further away from the output speakers or use a directional microphone.