AEG PV.500-MH manual Risks Due to Moving Parts, Fire-Related Risks, Water in electrical equipment

Page 18

Protect PV.500-MH Operating Instructions

i

Using residual-current-operated safety devices (FI) alone is not permitted.

WARNING

Water in electrical equipment!

Risk to life due to electric shock.

Do not use water to clean the cabinets.

Do not place any vessels containing fluids on electrical equipment.

2.8.2Risks Due to Moving Parts

CAUTION

Risk of injury due to rotating fans!

The fans of the INV control cabinet are freely accessible.

Never reach into rotating fans.

When setting up any system, ensure that the fans cannot be touched.

2.8.3Fire-Related Risks

Installation of fireproof enclosures (EN 60950-1)

A built-in floor plate ensures that, in the event of a fire, no molten or burning material can fall out of the equipment.

We recommend having a separate supply/exhaust air connection for the PV.500 in order to prevent smoke spreading in the event of a fire.

WARNING

Spread of smoke in electrical operating areas.

If smoke is detected or a fire breaks out, immediately disconnect the equipment from the power supply and inform the maintenance personnel.

18 of 68

80000043212 BAL

Image 18

Contents Protect PV.500-MH Operating InstructionsAEG Power Solutions GmbH Table of Contents Monitoring Systems, Messages and Faults System FunctionInterfaces Graphical Display and Operation Unit General Information Information on How to Use these InstructionsWarranty ValidityObligations of the Equipment Operator Target GroupsExplanations of Target Groups HandlingSkilled Personnel Skills and Training Storing Instructions Obligations of skilled personnelExplanation of Symbols and Safety Instructions Explanation of SymbolsSymbol Meaning Hazard Symbols Used Safety InstructionsSignal Words Used Symbol Meaning for skilled personnelSigns Containing Orders for Personal Protective Equipment Emergency Procedure e.g. in the Event of a Fire Safety AwarenessAbbreviations Particular Dangers associated with Photovoltaic Systems Thin-film cellsLightning protection System stop switch Safety Signs and Warning Notices on the EquipmentSafety and Protection Devices for the Equipment Protective CoversLockable Equipment Doors GuardResidual Hazards Electrical Hazards Water in electrical equipment Risks Due to Moving PartsFire-Related Risks Risk of injury due to rotating fansRisks from Maintenance and Repair Work Risks due to Loss of ControlProduct Details Product DescriptionImportant information about equipment documenta- tion Appropriate Use Dimensions and ViewsSafety Inappropriate UseStandards, Directives and CE Mark NameplateTechnology Operating Elements System Description Individual OperationOFF Status System FunctionDescription of Sequence Control Waiting for Feed Conditions StatusOperation Status Waiting StatusSequence Control During the Course of the Day Fault StatusNight Status Early morningLater in the evening DayEvening NightPower limit value for shutdown, delay time for shutdown Inverter stack switch-on timePermissible voltage dip after switching on the stack Sequence Control ParametersDescription of Fan Control General Fan Control, Cabinet FanCabinet Fan Control Parameters Fan Control, Inverter Stack FanParameters of Inverter Stack Fan Control Igbt temperature limit value for switching off the fanIgbt temperature limit Insulation Monitoring and Earthing of PV Cells GeneralProtect PV.500-MH Operating Instructions General Maintenance modeOperation with Thin-Film Solar Cells Sequence controlInsulation Monitoring Parameters Delay for shutdown of K21 in night operationMinimum time in maintenance mode MPP TrackerMonitoring Systems, Messages and Faults Table of Faults Temperature monitoring systemsCan I/O monitoring systems Fault/Message Unit Monitoring Systems Fault/Message DC voltage monitoring systems Fault/Message Interfaces Communication InterfaceCommunication data port 2 Technical Data MultiCom CCC hardware data assembly A29.1Communication data port 1 Communication data port 3Connections Configuration jumpersStructure of the MultiCom CCC Interface ButtonDescription of serial interfaces Port 2 X5 RS485 pin assignment default Shield connection of the RS485 bus lineController Area Network can at ConfigurationPort 2 X5 RS232 pin assignment Port 3 X4 can pin assignmentConfiguration Preparations Setting the terminal programProtect PV.500MH Operating Instructions Configuring the Modbus Protocol Data protocol configurationConfiguring Modbus Data Transmission Modbus/JBus data transmission configurationStructure of the COM Server internally wired to A93 COM Server GeneralNetwork Connection Installation of the COM Server Network Integration Configuration Configuration of the Virtual COM PortRemote Signalling Technical dataStructure Following default signals are used for remote signalling Graphical Display and Operation Unit DOUKeyboard Operation SignallingAcoustic signal generator LEDsPossible symbol keys and their function Start-upMenu Structure Menu Tree Main MenuOperating Display Operating display Normal operationExamples of possible displays Example of operating displaySolar radiation is too low, the inverter is in standby mode Monthly data t = day 1 31 for the last 12 months Example of yearly overview Menu Status/Measured ValuesBlocking Menu Inverter exampleService Fault HistorySettings Information