AEG PV.500-MH manual Graphical Display and Operation Unit, Dou

Page 57

Protect PV.500_MH Operating Instructions

8 Graphical Display and Operation Unit

8.1General Information

The graphical Display and Operation Unit (DOU) is integrated into the front of the solar inverter. It serves to signal and visualise unit data and to control the inverter system. The DOU consists of a display unit with 3 LEDs, a graphical LCD and an operating panel with 5 keys.￿

The global unit status can be read from the LEDs (1). An acoustic signal generator stresses the urgency of critical system statuses.￿

The graphical LCD shows equipment statuses and measured val- ues using symbols and plain text. You can control and parametrise the unit using menus which are protected by a password.￿

The DOU is operated using 4 display keys, to which alternating functions are assigned, and one ENTER key. The key functions that are currently active are shown on the LCD in the form of sym- bols.￿

Figure 24 DOU￿

1LEDs: Red, yellow, green (from top to bottom)￿

2Graphical display (LCD)￿

34 general function keys￿

4ENTER key￿

80000043212 BAL

57 of 68

Image 57
Contents Operating Instructions Protect PV.500-MHAEG Power Solutions GmbH Table of Contents Monitoring Systems, Messages and Faults System FunctionInterfaces Graphical Display and Operation Unit Warranty Information on How to Use these InstructionsGeneral Information ValidityExplanations of Target Groups Target GroupsObligations of the Equipment Operator HandlingSkilled Personnel Skills and Training Obligations of skilled personnel Storing InstructionsExplanation of Symbols and Safety Instructions Explanation of SymbolsSymbol Meaning Signal Words Used Safety InstructionsHazard Symbols Used Symbol Meaning for skilled personnelSigns Containing Orders for Personal Protective Equipment Emergency Procedure e.g. in the Event of a Fire Safety AwarenessAbbreviations Particular Dangers associated with Photovoltaic Systems Thin-film cellsLightning protection Safety and Protection Devices for the Equipment Safety Signs and Warning Notices on the EquipmentSystem stop switch Protective CoversLockable Equipment Doors GuardResidual Hazards Electrical Hazards Fire-Related Risks Risks Due to Moving PartsWater in electrical equipment Risk of injury due to rotating fansRisks due to Loss of Control Risks from Maintenance and Repair WorkProduct Details Product DescriptionImportant information about equipment documenta- tion Safety Dimensions and ViewsAppropriate Use Inappropriate UseNameplate Standards, Directives and CE MarkTechnology Operating Elements Individual Operation System DescriptionDescription of Sequence Control System FunctionOFF Status Waiting for Feed Conditions StatusWaiting Status Operation StatusNight Status Fault StatusSequence Control During the Course of the Day Early morningEvening DayLater in the evening NightPermissible voltage dip after switching on the stack Inverter stack switch-on timePower limit value for shutdown, delay time for shutdown Sequence Control ParametersFan Control, Cabinet Fan Description of Fan Control GeneralFan Control, Inverter Stack Fan Cabinet Fan Control ParametersIgbt temperature limit Igbt temperature limit value for switching off the fanParameters of Inverter Stack Fan Control Insulation Monitoring and Earthing of PV Cells GeneralProtect PV.500-MH Operating Instructions Operation with Thin-Film Solar Cells Maintenance modeGeneral Sequence controlMinimum time in maintenance mode Delay for shutdown of K21 in night operationInsulation Monitoring Parameters MPP TrackerMonitoring Systems, Messages and Faults Temperature monitoring systems Table of FaultsCan I/O monitoring systems Fault/Message Unit Monitoring Systems Fault/Message DC voltage monitoring systems Fault/Message Communication Interface InterfacesCommunication data port 1 Technical Data MultiCom CCC hardware data assembly A29.1Communication data port 2 Communication data port 3Structure of the MultiCom CCC Interface Configuration jumpersConnections ButtonDescription of serial interfaces Shield connection of the RS485 bus line Port 2 X5 RS485 pin assignment defaultPort 2 X5 RS232 pin assignment ConfigurationController Area Network can at Port 3 X4 can pin assignmentSetting the terminal program Configuration PreparationsProtect PV.500MH Operating Instructions Data protocol configuration Configuring the Modbus ProtocolModbus/JBus data transmission configuration Configuring Modbus Data TransmissionStructure of the COM Server internally wired to A93 COM Server GeneralNetwork Connection Installation of the COM Server Configuration of the Virtual COM Port Network Integration ConfigurationRemote Signalling Technical dataStructure Following default signals are used for remote signalling DOU Graphical Display and Operation UnitAcoustic signal generator SignallingKeyboard Operation LEDsStart-up Possible symbol keys and their functionMain Menu Menu Structure Menu TreeOperating display Normal operation Operating DisplayExample of operating display Examples of possible displaysSolar radiation is too low, the inverter is in standby mode Monthly data t = day 1 31 for the last 12 months Example of yearly overview Status/Measured Values MenuMenu Inverter example BlockingSettings Fault HistoryService Information