Hamilton Beach Programmable Slow Cooker, 33958 manual Probe Mode

Probe Mode		used after a recipe has been thoroughly cooked. Do not reheat food on Warm setting. If food has been cooked and then
		w WARNING	Food Safety Hazard.
		Food must be hot enough to prevent bacterial growth before using Warm setting. The Warm setting should only be
		refrigerated, reheat it on LOW or HIGH and then switch to Warm. Visit foodsafety.gov for more information.
1	2		3	4

Make sure probe is in center of	Insert probe into jack on side of	Press ON (I).	Press PROBE. Heat Setting will be
food and not touching bottom of	slow cooker.		illuminated.
crock.
		NOTE: To change temperature
		display from ºF to ºC:
		Press PROBE and ENTER at the
		same time.
		The temperature in ºC will
		now be displayed.
		If slow cooker is unplugged,
		it will reset to ºF.
5	6		7

Press arrows to select desired heat setting. Select HIGH or LOW.

Press ENTER. Desired Temp will illuminate.

Press arrows to select desired temperature.

8

840229700 ENv01.indd 8 6/20/13 12:21 PM