Berkel 909A, 919A important safety instructions Manual Operation

Page 11

MANUAL OPERATION

Note: Make sure on the Model 919A slicers that the shift lever is in the manual position.

1.Turn the unit on by pushing the START switch up, then release so that it goes back to the middle position. The knife will start slowly, then speed up.

WARNING

THE PRODUCT TABLE HANDLE IS THE ONLY PART OF THE

SLICER YOU SHOULD EVER TOUCH WHILE SLICING.

2.Using the product table handle, slide the table back and forth. If there is any rough operation or obstruction, shut the machine off, unplug the power cord, and call your nearest Designated Berkel Service Location, which can be found at www.berkel.com.

3.Allow the slicer to run for 15 seconds without moving the table. The slicer should automatically turn off after 15 seconds of non-movement of the product table. If not, call your nearest Designated Berkel Service Location.

AUTOMATIC OPERATION

1.See General Section on Page 8.

2.With the unit OFF, push shift lever toward AUTO with left hand while sliding the product table handle with the right hand until you feel it engage.

3.Remove your right hand from the product table handle.

4.Select LO speed by switching the speed selection switch to the DOWN position.

WARNING

THE NEXT STEP WILL CAUSE THE PRODUCT TABLE TO

MOVE AUTOMATICALLY AND THE KNIFE TO ROTATE.

5.Start the machine. The slicer will now slice approximately 40 slices per minute. Select HI speed by switching the speed selector switch to the UPPER position. The slicer will now slice approximately 60 slices per minute.

6.Turn the slicer OFF after testing by pushing the start/stop switch down and then pushing the shift lever to the MANUAL position.

909A & 919A OWNER/OPERATOR MANUAL • 9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 909A & 919A Are Indicated by Before Using this EquipmentTable of Contents Cuchilla Filosa PeligroNever Touch Rotating Knife Sharp Knife BladeEquipment Description HI/LOW Never Operate ANY Slicer Without the Labels in Place InstallationMachine Must be Installed Operated on SOLID, Level Support Assembly Sharp Knife To Avoid Serious Personal Injury Testing Prior to OperationManual Operation Never Push the Product Toward Knife with Your Hand Operating InstructionsNext Step will Cause Product Table to Move Automatically Next Steps will Expose the Knife Sharpener MaintenanceCleaning and Sanitizing Disassembly for Cleaning Knife Blade is Exposed During These Cleaning Steps Sharpening Vegetable Chute Optional AccessoriesReceiving Tray TroubleshootingRepair PARTS/REPAIR Service 919A 909A SpecificationsWarranty

909A, 919A specifications

The Berkel 919A and 909A slicers are renowned for their precision cutting and robust construction, making them essential tools in commercial kitchens and delicatessens. Designed to accommodate the varying demands of high-volume slicing, these machines blend traditional craftsmanship with modern technology to ensure optimal performance and reliability.

One of the main features of the Berkel 919A and 909A is their powerful motor. Both models are equipped with a high-performance, energy-efficient motor that provides consistent slicing power, enabling chefs and operators to slice a variety of products, from delicate meats to harder cheeses with ease. This ensures that food preparation is both efficient and effective, reducing preparation time while maintaining high-quality results.

The slicers boast an adjustable slice thickness control, allowing users to customize the thickness of their cuts with precision. Whether required for thick sandwich slices or thin charcuterie cuts, the Berkel 919A and 909A can accommodate diverse slicing needs effortlessly. Their user-friendly operation allows for quick adjustments, making them particularly suited for busy kitchen environments.

Additionally, the Berkel 919A and 909A feature a durable stainless-steel construction, providing both aesthetic appeal and exceptional hygiene standards. Stainless steel is not only easy to clean but also resistant to corrosion, ensuring longevity and reducing maintenance efforts over time. The robust design of these slicers means they can withstand the rigors of daily use in a high-demand setting.

Safety is another priority in the design of Berkel 919A and 909A slicers. They are equipped with safety features such as a handguard and an automatic shutdown system, which enhances user safety during operation. These safeguards help minimize the risk of accidents, making it easier for operators to focus on their tasks.

Furthermore, both models come with a large, easy-to-use food tray that holds products securely while slicing. This feature enhances stability during the slicing process, allowing for smooth and accurate cuts. The ergonomic design of the slicers reduces operator fatigue, allowing for extended periods of use without discomfort.

In conclusion, the Berkel 919A and 909A slicers stand out for their combination of powerful performance, adjustable cutting capabilities, durable construction, and enhanced safety features. These machines represent an invaluable investment for any establishment looking to streamline food preparation while ensuring top-tier quality in their presentations, epitomizing the perfect blend of tradition and technology in the culinary world.
Top Page Image Contents