Berkel 909A, 919A important safety instructions Assembly

Page 9

2.Tip the slicer onto a thick pad of cloth.

3.Remove one of the short shipping legs and replace with one of the 4” legs. Tighten and install a rubber foot.

CAUTION

Never have more than one leg loose at a time.

4.Once one 4” leg is in place, proceed to install the other three legs, ONE AT A TIME. Make sure to put a rubber foot on each leg.

5.When all four 4” legs are installed, get assistance from another person to lift and position the machine where it will be used.

CAUTION

Do not set slicer upright by pulling it forward on two legs.

You may break one or both of the 4” legs.

ASSEMBLY

GENERAL

1.To assemble the product table on the slicer:

a.The gauge plate must be completely closed before the table can be installed.

b.The support arm must be in the home, or fully forward position to mount the product table.

c.Since the pusher can slide or rotate, KEEP THE SLICING TABLE LEVEL.

d.Loosen the locking knob but do not remove.

e.Hold the slicing table with both hands and lower it carefully into the slot of the support arm until it is against the stop.

f.Tighten the locking knob.

2.To release the product pusher from the end of the product table:

a.Grasp the product pusher knob.

b.Pull the pusher gently up toward the upper end of the product table and lift free from the stop.

c.Lower the pusher gently until it rests at the bottom of the product table.

3.Put a few drops of the sample Berkel USDA-authorized food machine oil supplied with the slicer on the product pusher slide bar.

WARNING

USE ONLY USDA-AUTHORIZED OIL ON THIS MACHINE.

NON USDA-AUTHORIZED OIL MAY CONTAMINATE MACHINE

AND CAUSE FOOD POISONING AND PERSONAL INJURY.

909A & 919A OWNER/OPERATOR MANUAL • 7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 909A & 919A Are Indicated by Before Using this EquipmentTable of Contents Cuchilla Filosa PeligroNever Touch Rotating Knife Sharp Knife BladeEquipment Description HI/LOW Installation Machine Must be Installed Operated on SOLID, Level SupportNever Operate ANY Slicer Without the Labels in Place Assembly Sharp Knife To Avoid Serious Personal Injury Testing Prior to OperationManual Operation Never Push the Product Toward Knife with Your Hand Operating InstructionsNext Step will Cause Product Table to Move Automatically Next Steps will Expose the Knife Sharpener MaintenanceCleaning and Sanitizing Disassembly for Cleaning Knife Blade is Exposed During These Cleaning Steps Sharpening Vegetable Chute Optional AccessoriesReceiving Tray TroubleshootingRepair PARTS/REPAIR Service 919A 909A SpecificationsWarranty

909A, 919A specifications

The Berkel 919A and 909A slicers are renowned for their precision cutting and robust construction, making them essential tools in commercial kitchens and delicatessens. Designed to accommodate the varying demands of high-volume slicing, these machines blend traditional craftsmanship with modern technology to ensure optimal performance and reliability.

One of the main features of the Berkel 919A and 909A is their powerful motor. Both models are equipped with a high-performance, energy-efficient motor that provides consistent slicing power, enabling chefs and operators to slice a variety of products, from delicate meats to harder cheeses with ease. This ensures that food preparation is both efficient and effective, reducing preparation time while maintaining high-quality results.

The slicers boast an adjustable slice thickness control, allowing users to customize the thickness of their cuts with precision. Whether required for thick sandwich slices or thin charcuterie cuts, the Berkel 919A and 909A can accommodate diverse slicing needs effortlessly. Their user-friendly operation allows for quick adjustments, making them particularly suited for busy kitchen environments.

Additionally, the Berkel 919A and 909A feature a durable stainless-steel construction, providing both aesthetic appeal and exceptional hygiene standards. Stainless steel is not only easy to clean but also resistant to corrosion, ensuring longevity and reducing maintenance efforts over time. The robust design of these slicers means they can withstand the rigors of daily use in a high-demand setting.

Safety is another priority in the design of Berkel 919A and 909A slicers. They are equipped with safety features such as a handguard and an automatic shutdown system, which enhances user safety during operation. These safeguards help minimize the risk of accidents, making it easier for operators to focus on their tasks.

Furthermore, both models come with a large, easy-to-use food tray that holds products securely while slicing. This feature enhances stability during the slicing process, allowing for smooth and accurate cuts. The ergonomic design of the slicers reduces operator fatigue, allowing for extended periods of use without discomfort.

In conclusion, the Berkel 919A and 909A slicers stand out for their combination of powerful performance, adjustable cutting capabilities, durable construction, and enhanced safety features. These machines represent an invaluable investment for any establishment looking to streamline food preparation while ensuring top-tier quality in their presentations, epitomizing the perfect blend of tradition and technology in the culinary world.
Top Page Image Contents