Berkel 919A, 909A Testing Prior to Operation, Sharp Knife To Avoid Serious Personal Injury

Page 10

4.USDA authorized Berkel oil is available in 2-oz (P/N 4675-00182), 16-oz (P/N 4675-00183) and one-gallon (P/N 4675-00184) containers.

5.To store the pusher at the top of the product table, simply pull the product pusher to the top of the table and allow the nylon button to fall behind the catch plate at the top of the product table.

TESTING PRIOR TO OPERATION

WARNING

SHARP KNIFE

TO AVOID SERIOUS PERSONAL INJURY:

1.NEVER touch rotating knife.

2.Keep HANDS CLEAR of all MOVING PARTS. Use PRODUCT TABLE HANDLE— not your hand.

3.Always TURN OFF slicer when NOT IN USE.

4.Always TURN thickness control knob as far to the right as possible when NOT IN USE.

5.TURN OFF and UNPLUG machine before CLEANING or SERVICING.

GENERAL

1.Make sure the machine is unplugged.

2.Check to see that the center plate, product table and sharpener assembly are in proper position.

3.Turn thickness control knob as far to the right as possible. This positions the gauge plate so that the knife is not exposed during testing.

4.Plug the power cord into a GROUNDED, APPROVED electrical outlet, using the plug that is provided with the machine. The pilot light should be solid and constant. If it is blinking, then one of the following conditions applies:

One blink

- The center plate is not installed properly.

Two blinks

- The meat table is not installed properly.

Three blinks

- If the slicer has a lift, then the lift is not completely down.

Four blinks

- The motor overload sensor has been tripped.

If you cannot satisfy the condition causing the blinking light, then call you nearest Designated Berkel Service Location.

8• 909A & 919A OWNER/OPERATOR MANUAL

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 909A & 919A Before Using this Equipment Are Indicated byTable of Contents Peligro Cuchilla FilosaSharp Knife Blade Never Touch Rotating KnifeEquipment Description HI/LOW Machine Must be Installed Operated on SOLID, Level Support InstallationNever Operate ANY Slicer Without the Labels in Place Assembly Testing Prior to Operation Sharp Knife To Avoid Serious Personal InjuryManual Operation Operating Instructions Never Push the Product Toward Knife with Your HandNext Step will Cause Product Table to Move Automatically Sharpener Maintenance Next Steps will Expose the KnifeCleaning and Sanitizing Disassembly for Cleaning Knife Blade is Exposed During These Cleaning Steps Sharpening Optional Accessories Vegetable ChuteTroubleshooting Receiving TrayRepair PARTS/REPAIR Service Specifications 919A 909AWarranty

909A, 919A specifications

The Berkel 919A and 909A slicers are renowned for their precision cutting and robust construction, making them essential tools in commercial kitchens and delicatessens. Designed to accommodate the varying demands of high-volume slicing, these machines blend traditional craftsmanship with modern technology to ensure optimal performance and reliability.

One of the main features of the Berkel 919A and 909A is their powerful motor. Both models are equipped with a high-performance, energy-efficient motor that provides consistent slicing power, enabling chefs and operators to slice a variety of products, from delicate meats to harder cheeses with ease. This ensures that food preparation is both efficient and effective, reducing preparation time while maintaining high-quality results.

The slicers boast an adjustable slice thickness control, allowing users to customize the thickness of their cuts with precision. Whether required for thick sandwich slices or thin charcuterie cuts, the Berkel 919A and 909A can accommodate diverse slicing needs effortlessly. Their user-friendly operation allows for quick adjustments, making them particularly suited for busy kitchen environments.

Additionally, the Berkel 919A and 909A feature a durable stainless-steel construction, providing both aesthetic appeal and exceptional hygiene standards. Stainless steel is not only easy to clean but also resistant to corrosion, ensuring longevity and reducing maintenance efforts over time. The robust design of these slicers means they can withstand the rigors of daily use in a high-demand setting.

Safety is another priority in the design of Berkel 919A and 909A slicers. They are equipped with safety features such as a handguard and an automatic shutdown system, which enhances user safety during operation. These safeguards help minimize the risk of accidents, making it easier for operators to focus on their tasks.

Furthermore, both models come with a large, easy-to-use food tray that holds products securely while slicing. This feature enhances stability during the slicing process, allowing for smooth and accurate cuts. The ergonomic design of the slicers reduces operator fatigue, allowing for extended periods of use without discomfort.

In conclusion, the Berkel 919A and 909A slicers stand out for their combination of powerful performance, adjustable cutting capabilities, durable construction, and enhanced safety features. These machines represent an invaluable investment for any establishment looking to streamline food preparation while ensuring top-tier quality in their presentations, epitomizing the perfect blend of tradition and technology in the culinary world.
Top Page Image Contents