Grandstream Networks GXV300X manual Making Calls using IP Addresses

Page 15

4. USING THE CALL HISTORY: To call a phone number in the phone’s history When using the call history, the phone will use the same SIP account as was used for the last call/call attempt. Thus, when returning a call made to the third SIP account, the phone will use the third SIP account return the call.

Press the MENU button to bring up the Main Menu.

Select Call History and then “Received Calls”, “Mi ssed Calls” or “Dialed Calls” depending on your needs

Select phone number using the arrow keys

Press OK to select

Press OK again to dial.

5.USING THE PHONEBOOK: Calling a phone from the phone’s phonebook.

Each entry in the phonebook can be attached to an individual SIP account. The phone will use that SIP account to make the phone call.

Go to the phonebook by:

i.Pressing the phonebook button (bottom, left-hand side of phone), or

ii.Pressing the DOWN arrow key, or

iii.Pressing the menu button and Selecting “Phone book” and Press MENU

Select the phone number by using the arrow keys

Press OK to select

Press OK again to dial.

6.PAGING/INTERCOM:

The paging/intercom function can only be used if the SERVER/PBX supports this feature and both the phones and PBX are correctly configured.

Take the Handset/SPEAKER/Headset off-hook,

Select the LINE key associated with account

Press OK key to display LCD: LINEx: PAGE USING.

Dial the phone number you want to Page/Intercom

Press SEND key.

NOTE:

Dial-tone and dialed number display occurs after the handset is off-hook and the line key is se- lected.

The phone waits 4 seconds (by default; no key entry timeout) before sending and initiating the call. Press the “SEND” button (or # key if configured) to override the 4 second delay.

Making Calls using IP Addresses

Direct IP calling allows two phones to talk to each other in an ad hoc fashion without a SIP proxy. VoIP calls can be made between two phones if:

Both phones have public IP addresses, or

Both phones are on a same LAN/VPN using private or public IP addresses, or

Grandstream Networks, Inc.

GXV300x User Manual

Page 13 of 54

 

Firmware 1.2.3.7

Updated: 12/2010

Image 15
Contents Grandstream Networks, Inc Table of Contents GXV300X WEB GUI Welcome Installation 10/100Mbps RJ-45 port for uplink to Ethernet 10/100Mbps RJ-45 port for connecting PC as switch modeHandset Rest Tab Sion upTab with exten Sion down Superb Audio Quality Feature RichOpen Standards Compatible Network InterfacesCall Handling Features Feature KeysVideo Features Audio FeaturesAdvanced Server Firmware UpgradesFeatures Caller ID PrivacyUsing GXV300X IP Video Phone OSD/Camera Loopback Dis- play On/Off key Play and OSD ON/OFF UP ↑Completing Calls Handset, Speakerphone and Headset ModeMaking Calls using IP Addresses For example Quick IP Call ModeWay Conferencing Receiving CallsCall Waiting/ Call Hold Call TransferCamera Block Voice Messages Message Waiting IndicatorMute/Delete Do Not DisturbMaking calls Camera Local Loopback Display and OSD ON/OFFOSD Display Explanation Making/Receiving Calls via Pstn only applicable on GXV3005Enable Call Waiting per Call Disable Call Waiting for all subsequent callsEnable Call Waiting for all subsequent calls Disable Call Waiting per CallConfiguration Guide Flow Chart of KEY PAD Configuration Menu Phone Book Call History ∙ Audio ∙ Video Codecs ∙ Upgrade∙ Factory Reset ∙ Ring Volume∙ Pstn Loopback ∙ Ethernet Loopback Access the Web Configuration PagesDefinitions Port End User Password Sensitive with a maximum length of 25 characters7,2,011,1,7,2,060 Time ZoneDaylight Savings Time Rule SyntaxAdvanced User Configuration Suppression Admin PasswordG723 rate SilenceVideo Frame Mode Enable VideoPassword TimeoutUse Random Port ConfigConfig File UpgradeDownload AuthenticateConf File Screen SaverUpdate DisableCall-Waiting Disable Call-Waiting Tone DisableAccount Active Authenticate IDAuthenticate Password Unregister on RebootProxy-Require Keep-Alive Using SIP OPNAT Traversal Stun Subscribe for MWI1900x. =16172-9xxxxxx 12-9xx2-9xxxxxx 0112-9x Enable Call FeaturesCaller Request Timer Dial Plan Dial Plan RulesUAC Specify Refresher Callee Request TimerForce Timer Enable 100relSrtp Mode Jitter DelayDefault Resolution Enable RFC5168 SupportCaller ID Scheme Silence TimeoutAC Termination Imped AnceCaller ID Volume AmplificationDisable FXS Caller ID Enable FXS Call WaitingConfiguration Through Secure Central Provisioning Server Web Configuration Interface Key Pad MenuNo Local HTTP/TFTP Server Instructions for firmware upgrade via a Local Tftp Server Managing Firmware and Configuration File Download Introduction How It Works and ConfigurationExample Phonebook File XML SyntaxScreensaver Images Screenshot of Screensaver Utility Ringtone File Size USB 2.0 Port Connect the GXV300X to Your TV using RCA CableCross Over Cable For Some Model of Headset Headset Jack DiagramCross Over Cable required for Plantronics Headset Limitations PC side Monitor DeviceScreenshot Monitoring Station Grandstream Networks, Inc Restore Factory Default Setting