Grandstream Networks GXV300X manual Definitions

Page 25

1

2

3

The Web-enabled computer has to be connected to the same sub-network as the phone. This can easi- ly be done by connecting the computer to the same hub or switch as the phone is connected to. In ab- sence of a hub/switch (or free ports on the hub/switch), please connect the computer directly to the phone using the PC-port on the phone.

If the phone is properly connected to a working Internet connection, the phone will display its IP ad- dress. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a number from 0-255. You will need this number to access the Web Configuration Menu. e.g. if the phone shows 192.168.0.60, please use “http://192.168.0.60” in the address bar your browser.

The default administrator password is “admin”; the default end-user password is “ 123”.

NOTE: When changing any settings, always SUBMIT them by pressing the button on the bottom of the page. Reboot the phone to have the changes take effect. If, after having submitted some changes, more settings have to be changed, press the menu option needed.

Definitions

This section will describe the options in the Web configuration user interface. As mentioned, a used can log in as an administrator or end-user.

Functions available for the end-user are:

∙Status: Displays the network status, account statuses, software version and MAC-address of the phone

∙Basic: Basic preferences such as date and time settings, multi-purpose keys and LCD settings can be set here.

Additional functions available to administrators are:

∙Advanced Settings: To set advanced network settings, codec settings.

∙Account: To configure each of the SIP accounts.

∙FXO Settings: This is only applicable on GXV3005.

∙FXS Settings: This is only applicable on GXV3006.

TABLE 10: STATUS PAGE DEFINITIONS

 

 

 

 

 

 

Hardware Revision

 

Hardware version number: Main Board, Interface Board

 

 

 

 

 

 

 

 

 

 

 

 

Part Number

 

This field contains the product part number

 

 

 

 

 

 

 

 

 

 

 

 

MAC Address

 

The device ID, in HEX format. This is a very important ID for ISP troubleshooting.

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

 

This field shows IP address of GXV300x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Model

 

This field contains the product model information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Software Version

 

∙ Program: This is the main firmware release number, always used for identify the whole

 

 

 

 

software (or firmware) system of the phone.

 

 

 

 

∙ Loader: Driver loader code version number.

 

 

 

 

∙ Boot: Booting code version number

 

 

 

 

 

 

System Up Time

This field shows system up time since the last reboot.

Grandstream Networks, Inc.

GXV300x User Manual

Page 23 of 54

 

Firmware 1.2.3.7

Updated: 12/2010

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Grandstream Networks, Inc Table of Contents GXV300X WEB GUI Welcome Installation 10/100Mbps RJ-45 port for uplink to Ethernet 10/100Mbps RJ-45 port for connecting PC as switch modeSion up Handset Rest TabTab with exten Sion down Open Standards Compatible Feature RichNetwork Interfaces Superb Audio QualityVideo Features Feature KeysAudio Features Call Handling FeaturesFeatures Firmware UpgradesCaller ID Privacy Advanced ServerUsing GXV300X IP Video Phone OSD/Camera Loopback Dis- play On/Off key Play and OSD ON/OFF UP ↑Completing Calls Handset, Speakerphone and Headset ModeMaking Calls using IP Addresses For example Quick IP Call ModeCall Waiting/ Call Hold Receiving CallsCall Transfer Way ConferencingMute/Delete Voice Messages Message Waiting IndicatorDo Not Disturb Camera BlockOSD Display Explanation Camera Local Loopback Display and OSD ON/OFFMaking/Receiving Calls via Pstn only applicable on GXV3005 Making callsEnable Call Waiting for all subsequent calls Disable Call Waiting for all subsequent callsDisable Call Waiting per Call Enable Call Waiting per CallConfiguration Guide Flow Chart of KEY PAD Configuration Menu ∙ Factory Reset ∙ Audio ∙ Video Codecs ∙ Upgrade∙ Ring Volume Phone Book Call History∙ Pstn Loopback ∙ Ethernet Loopback Access the Web Configuration PagesDefinitions Port End User Password Sensitive with a maximum length of 25 charactersDaylight Savings Time Time ZoneRule Syntax 7,2,011,1,7,2,060Advanced User Configuration G723 rate Admin PasswordSilence SuppressionPassword Mode Enable VideoTimeout Video FrameConfig File ConfigUpgrade Use Random PortConf File AuthenticateScreen Saver DownloadCall-Waiting Disable DisableCall-Waiting Tone Disable UpdateAuthenticate Password Authenticate IDUnregister on Reboot Account ActiveNAT Traversal Stun Keep-Alive Using SIP OPSubscribe for MWI Proxy-RequireCaller Request Timer Enable Call FeaturesDial Plan Dial Plan Rules 1900x. =16172-9xxxxxx 12-9xx2-9xxxxxx 0112-9xForce Timer Callee Request TimerEnable 100rel UAC Specify RefresherDefault Resolution Jitter DelayEnable RFC5168 Support Srtp ModeAC Termination Imped Silence TimeoutAnce Caller ID SchemeDisable FXS Caller ID Volume AmplificationEnable FXS Call Waiting Caller IDConfiguration Through Secure Central Provisioning Server Key Pad Menu Web Configuration InterfaceNo Local HTTP/TFTP Server Instructions for firmware upgrade via a Local Tftp Server Managing Firmware and Configuration File Download Introduction How It Works and ConfigurationExample Phonebook File XML SyntaxScreensaver Images Screenshot of Screensaver Utility Ringtone File Size USB 2.0 Port Connect the GXV300X to Your TV using RCA CableCross Over Cable For Some Model of Headset Headset Jack DiagramCross Over Cable required for Plantronics Headset Limitations PC side Monitor DeviceScreenshot Monitoring Station Grandstream Networks, Inc Restore Factory Default Setting
Top Page Image Contents