| Disable SIP User Display |
| Default is No. If enabled, SIP User ID will not be shown on the LCD |
|
|
|
|
|
|
|
|
|
|
|
| Disable IP Address Display |
| Default is No. If enabled, the IP address of the phone will not be shown on the LCD |
|
|
|
|
|
|
|
|
|
|
|
| LCD Screen Saver |
| Default value is 60 seconds, 0 means turn off this feature. |
|
| Start Interval |
| After 60 seconds the Screen Saver will start. The Screen saver file stored in flash is limited to |
|
|
|
| 20 images or 320kb. Change screen saver in the same way as customized ring tone. |
|
|
|
|
|
|
|
|
|
|
|
| LCD Screen Saver |
| Default is 10. |
|
| Refresh Interval |
| This parameter controls the picture changing speed showed on the LCD. |
|
|
|
|
|
|
|
|
|
|
|
| LCD Auto Power Off |
| Default value is 300 seconds. 0 means LCD is always ON |
|
| Interval |
| After 300 seconds of idle time, the LCD will automatically Power Off. |
|
|
|
|
|
|
|
|
|
|
|
| LCD Backlight Brightness |
| Default value is 128. |
|
|
|
|
|
|
|
|
|
|
|
| LCD Contrast |
| Default value is 128 |
|
|
|
|
|
|
|
|
|
|
|
| LCD Chroma Saturation |
| Default value is 128 |
|
|
|
|
|
|
|
|
|
|
|
| LCD Text Color |
| Change the LCD font text color, adjust via selected numbers. Default is 255 |
|
|
|
|
|
|
|
|
|
|
|
| OSD Text Color |
| Select desired OSD (On Screen Display) Text color from drop down box. |
|
|
|
| Default is white. The color can distinguish OSD from video background |
|
|
|
|
|
|
|
|
|
|
|
| PIP Position |
| Local Mirror Images showed via Picture in Picture positions in the LCD. Default is Top Left. |
|
|
|
|
|
|
|
|
|
|
|
| Starting Video OSD/PIP |
| Default value is OSD On, PIP On |
|
| Mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Camera Zoom Mode |
| Select desired camera zoom mode (Wide, Optical Tele, Digital Tele). Can adjust local video |
|
|
|
| zoom either in mirror mode or during the call (on the fly) by pressing the Left or Right Arrow |
|
|
|
| Key |
|
|
|
|
|
|
|
|
|
|
|
| Camera Exposure |
| Select desired Camera Exposure mode based on surroundings. Default to Auto |
|
|
|
|
|
|
|
|
|
|
|
| Camera Color Mode |
| Select desired Camera Color Mode (Color or Monochromatic). Default to Color Mode |
|
|
|
|
|
|
|
|
|
|
|
| Camera White Balance |
| Select desired Camera White Balance to be automatic or Fixed. Default to Auto |
|
|
|
|
|
|
|
|
|
|
|
| Camera Lens Correction |
| Correct Camera Lens noise. Default is Yes. |
|
|
|
| Recommend set to YES to reduce camera lens noise and improve video quality. |
|
|
|
|
|
|
|
|
|
|
|
| TV Output |
| Select desired TV Output type (PAL or NTSC). |
|
|
|
|
|
|
ADVANCED USER CONFIGURATION
The Advanced User configuration includes not only the end user configuration, but also advanced confi- guration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous con- figuration.
Login to the Advanced User Configuration page following the same directions as in Basic Configuration. The factory default password for Advanced User is “admin”. User may change the password. The pass- word is case sensitive with a maximum length of 25 characters.
Grandstream Networks, Inc. | GXV300x User Manual | Page 26 of 54 |
| Firmware 1.2.3.7 | Updated: 12/2010 |