Grandstream Networks GXV300X Authenticate, Conf File, Screen Saver, Download, Phonebook, Network

Authenticate	Authenticate configuration file before acceptance.
Conf File	Default is No.
Screen Saver
	This is the path for screen saver image downloading. It may or may not be the same path as the
Download	firmware or configuration server. User can adjust based on own network environment.
Phonebook	This is the path for XML based phonebook to be downloaded into the phone.
XML Download	User can use TFTP or HTTP to download the phonebook.
	User can also select whether to overwrite the manually inputted phonebook records in the flash.
Network	Enable Network Screen Saver.
Screen Saver	User needs to enter a HTTP URL to download screen saver image from Internet.
Weather Forecast
	Enable weather forecast to be displayed on LCD. User needs to enter a HTTP URL to download
	the weather forecast that complies to the phone’s weather XML schema.
Headline News	Enable RSS 2.0 feed to be displayed on LCD.
Off-hook Auto
	To configure a User ID/extension to dial automatically when the phone is taken offhook.
Dial
DTMF
	This parameter sets the payload type for DTMF using RFC2833. Default is 101.
Payload Type
Syslog Server	The IP address or URL of System log server.
Syslog Level	Select to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or
	ERROR. Syslog messages are sent based on the following events:
	∙ product model/version on boot up (INFO level)
	∙ NAT related info (INFO level)
	∙ sent or received SIP message (DEBUG level)
	∙ SIP message summary (INFO level)
	∙ inbound and outbound calls (INFO level)
	∙ registration status change (INFO level)
	∙ negotiated codec (INFO level)
	∙ Ethernet link up (INFO level)
	∙ SLIC chip exception (WARNING and ERROR levels)
	∙ memory exception (ERROR level)
	The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following
	components: GS_LOG: [device MAC address][error code] error message
	For example:
	May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]. Ethernet link is up.
NTP server
	This parameter defines the URI or IP address of the NTP (Network Time Protocol) server.
	GXV300x phone get its date and time from there.
	User can turn on DHCP Option 42 to override the NTP server if there is one in the LAN.
Distinctive	Select Distinctive Ring Tone 1 through 3 for a particular Caller ID specified.
Ring Tone	The GXV will ONLY use selected ring tones for particular Caller IDs. For all other calls, default
	system ring tone will be used.
	If server support Alert-Info header and standard ring tone set (like Bellcore) specified, then Caller
	ID must leave Blank and the ring tone will be used based on the info header from server.
System	System ring tone. Default is North American standard.
Ring Tone	Adjust system ring tone frequencies and cadences based on local telecom standard.
Grandstream Networks, Inc.		GXV300x User Manual	Page 30 of 54
		Firmware 1.2.3.7	Updated: 12/2010