Operators Manual |
| |
3. Remove the brewer dispense pipe from the dispense |
| |
| ||
head. Pull down the brewer release pin (b) and |
| |
carefully lift the brewer unit up and clear of its locating | b | |
bracket.Thoroughly clean the external surfaces of the | ||
| ||
brewer. |
|
4.With the brewer unit removed, clean the area surrounding its locating bracket. Refit brewer to machine and refit the outlet pipe to the dispense head.
5.Switch on the power to the machine using the safety key. The brewer chamber will return to its closed position. Referring to the instructions supplied with the product, pour the recommended amount of
6.Press and hold the Brewer Open switch (2) to index the brewer to its fully open position. Remove the safety key to switch off the power to the machine. Feed the filter paper through the paper feed mechanism. Switch on the power to the machine using the safety key. Filter paper will index automatically and the brewer chamber will return to its closed position. Refit the brewer guard.
7.Remove the brewer waste container and empty its contents. Clean waste bucket and refit into machine. Remove the safety key and close the door.
N.B. Every time that the brewer waste container is emptied the waste counter must be reset. Restore power to the machine using the safety key and press button 12 on the service keypad. Two audible bleeps confirm that the counter has been reset to zero.
4.7 Paperless Brewer Unit - Cleaning Procedure
1.Switch on the power using the door switch safety key. Press and hold the Brewer Open switch (2) located in the service keypad on the rear of the door until the brewer chamber reaches its fully open position.
Remove the door switch safety key to switch off the power to the machine. Remove the brewer guard.
2.Carefully remove the water outlet tubes c/w water pipes (a) from the tea and coffee chambers. Lift the latch bar (b) and remove the brewer chambers/wipe arms assembly.
a
b
26