Evolution Technologies Instant, Freshbrew & Espresso (B2C) Machine

Delay

00.2

0-9 to Edit Value

Edit when Finished

Operators Manual

1.From the Main Menu press the ▼ (down) key until Timed Events is highlighted

	then press the ↵ (Edit) key. Once in the Timed				Sanitation Events Menu
	Events menu press the ▼ (down) key to highlight			2	Timed	Off
	Sanitation Events Menu then press the ↵		(Edit)	3	Timed	Off
	Sanitation Events Menu then press the ↵		(Edit)	4	Timed	Off
	key. Press the ▼ (down) key until the first Post			4	Timed	Off
	key. Press the ▼ (down) key until the first Post			5	Timed	Off
	Vend event is highlighted. The LCD will display			6	Timed	Off
	Vend event is highlighted. The LCD will display			7	Post Vend	Off
	the screen as shown.			7	Post Vend	Off
	the screen as shown.

2.	With Post Vend highlighted, press the ↵		(Edit)		7
	key to access the 7 Post Vend sub menu. The			State
	key to access the 7 Post Vend sub menu. The			Event Type
	LCD will change and display the screen as shown.			Event Type
	LCD will change and display the screen as shown.			Delay
	By default the current State is set to Off as
	indicated by the status line at the bottom of the				Off
	screen.				Off
	screen.				State
3.	Press the ↵	(Edit) key to access the State sub			State
	menu. Using the ▼ (down) key, set the state to				Off
	menu. Using the ▼ (down) key, set the state to				On
	On (indicated by the filled radio button). Press				On
	On (indicated by the filled radio button). Press
	the ↵ (Edit) key to return to the 7 (Post Vend)
	screen. Verify that the status line confirms the
	State is set to On.
4.	Press the ▼ (down) key to highlight Event Type.				7
	By default the event is set to Timed as indicated			State
	by the text	displayed in the status line	at the	Event Type
	by the text	displayed in the status line	at the	Delay

bottom of the screen. Therefore it is not necessary for the operator to enter this sub

menu.

Post Vend

5.Press the ▼ (down) key to highlight Delay. The status line indicates the factory

default delay which is set to 0.1hrs (6 minutes). To change the value so that the machine will self clean 12 minutes after a drink is vended press the

↵(Edit) key to access the Delay sub menu. The

LCD will display the screen as shown. Using the drink selection keypad, press the sequence 0-0- 2 to set the new delay.

Press the ↵ (Edit) key and verify that the status line confirms that Delay (when highlighted) is set to 0.2hrs.

6.Press the X (Exit) key three times to return to the Timed Events Menu. Using the sequence described above the operator can quickly and easily set up additional post vend sanitation event periods for the machine if required.