Operators Manual
7.Temperature Units: This menu allows the operator to change the way that the temperature is displayed, either °C or °F, on the LCD when the machine is in standby mode. Use the ▲ (up) or ▼
(down) keys to set the required option followed by the ↵ (Edit) key to store/save it (indicated by the filled radio button).
Temperature Units
Celsius ( °C)
Fahrenheit ( °F)
8.Idle Screen Options: This menu allows the operator to configure the LCD so that it displays either the time or the time and water temperature with the standby message when idle. To configure the idle screen options, proceed as follows:
1.From the System Settings menu press the ▼ (down) key to highlight Idle Screen Options and press the ↵ (Edit) key to access the menu.
2.Press the ▼ (down) key to highlight the required option, eg Time and Temp
(indicated by the filled radio button). The LCD will display the screen as shown opposite. Press the ↵ (Edit) key to return to the System Settings screen. With Idle Screen Options highlighted, verify that the status line confirms the option is set to Time and Temp.
3.Press the X (Exit) key until the machine exits the
engineers program into standby mode. The LCD will display the standby message with the time and date as shown.
Temp: 90C
7.7 Security Codes Menu
The security code for entry into the Operators Program is factory set so that the operator presses button 1 on the service keypad followed by the sequence
7.8 Timed Events Menu
1.Time of Day Events: From this menu the operator can set up inhibited vend periods, free vend periods and discounted vend periods.
The following example describes how the operator can program the machine to free vend specific drink selections between 10.30 am and 2:30 pm on week days.
54