Operators Manual
Once the operator has viewed and recorded required information from these sub- menu’s, the data can be deleted via the Clear Data sub menu.
5.From the Resettable Sales Data screen, highlight
the Clear Data sub menu using the ▼ (down) key and press the ↵ (Edit) key. The LCD on the front of the machine will display the screen as shown opposite, warning the operator that all data will be deleted.
Clear Data
Are you sure you want to set all resettable data to zero?
CANCEL - EXIT OK - EDIT
Either press the ↵ (Edit) key to clear the data or press the X (Exit) key to exit the menu without clearing the data.
3. Timed Events
1.From the Data Recall menu scroll down and highlight Timed Events then press the ↵ (Edit) key. The LCD will display the screen as shown opposite. From this menu screen the operator can access then view and record information relating to the four events as shown.
Timed Events
Power Losses
Last Data Clear
Last Vend
Last Clock Set
2.To view the Power Losses screen, press the ↵ (Edit) key. The screen displays a list of the 10 most recent occasions when power to the machine has been disconnected in date, time of day and period format. Press the X (Exit) key to return to the Timed Events menu.
Power Losses
3.Press the ▼ (down) key to highlight Last Data Clear, Last Vend and Last Clock Set. Information for these events is displayed along the bottom of the screen.
4.Identification Numbers
1. From the Data Recall menu scroll down and
highlight Identification Numbers then press the ↵ (Edit) key. The LCD will display the screen as
shown opposite. From this menu the operator
can access and then view serial number, part number and version type information relating to
the main PCB and any MDB coin/card mechanism fitted to the machine.
N.B. Coin Mechanism, Bill Validator and Card Reader will only be displayed if an MDB device is fitted to the machine.
43