Operators Manual
13.Wipe clean the interior of the door and the area around the cup station using a clean, damp sanitised cloth.
Refit the drip tray ensuring that the drip tube from the cup throat moulding is located correctly at the rear of the tray.
14.Check the levels of the cups in the cup turret and where necessary, refill with correct sized cups.
Release the catch (a) securing the cup drop unit and swing the unit away from the door. Remove the lid and fill the tubes with the correct size cups for the type of cup catcher fitted to the machine.
Allow the cups to drop into the tubes directly from the packaging. DO NOT touch the cups with your hands.
Important: Do not fill the tube directly above the cup dispense position. Allow the cup turret motor to rotate a full tube to the cup dispense position when the machine is powered up. Rotating the cup turret by hand will damage the mechanism.
Note: If paper cups are being loaded, each pack of cups must first be inspected for damage to the cup rims. Damaged cups must not be used.
Replace the lid and rotate the cup turret assembly back to its operating position. Ensure that the unit ‘locks’ into place.
15.Release the catch and open the coin mechanism cover. Wipe the inside with a damp cloth.
Check the coin tubes and refill if required.
24