Turbo Chef Technologies 2020 HIGH h manual Updating the Firmware

Page 23

1 5

Updating the Firmware

From the oven off screen,

1.Insert the gray smart card (see Figure 13, page 13) with the gold chip facing the front of the oven. If multiple smart cards are required, they will be labeled in sequence - ensure the correct sequence is followed.

2.From the COOLING DOWN or OVEN OFF MODE,

press and hold the idle key until the oven resets (approximately 5 seconds). The display will go blank until the upload is complete.

3.When the oven beeps one long high tone, the load was successful. If a second card was provided, insert it.

4.When the oven restarts and the display turns on, the update is complete. Remove the smart card from the oven.

NOTE: If the update is unsuccessful, the display will remain off and the oven will beep one long, low tone. If this occurs, repeat the above procedure. If the update fails multiple times, a smart card may be damaged. Please note that the oven will be inoperable until a successful update is performed. As such, TurboChef reinforces proper handling of smart cards to help prevent static damage, and recommends that each service technician keep a backup copy.

OVEN MODES

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Accelerating the World of Cooking TM Page For further information, call Page Table of Contents Oven Modes Reducing Fire Risk Important Safety Information Please Read FirstGeneral Safety Information Grounding Instructions Power Cord ReplacementPreventing Oven Damage Conveyor DimensionsElectrical Specifications ExteriorOven Construction Installation InstructionsPackaging CertificationsVentilation Requirements Oven Location and PlacementInstallation Near Open Heat Source Approved cleaner, part number Daily Cleaning InstructionsTurn the Oven Off Weekly Cleaning InstructionsRemove Inner Oven Components Clean Oven Components Ready the Oven for Use Oven Controls Cooking a Product Mode 1 Oven OffMode 2 Belt Speed Select Mode 7 Idle Mode 3 WarmingMode 4 Soaking Mode 6 Cooling DownChanging a Cooking Profile Name Editing a Cooking ProfileAdjusting the Top and Bottom Air Adjusting the Belt SpeedAdjusting the Temperature Accessing the Setup Mode Config ModeSetup Mode Accessing the Fault Count ScreenChanging the Display Temperature Updating the Firmware Issue Possible Causes Resolution O U B L E S H O OT I N G Part Description TurboChef Part Number Replaceable PartsNorth America Limited Warranty Warranty Service, Exclusive Remedy Disclaimer of Damages International Limited Warranty Warranty Service International Limited Warrant Y International Limited Warrant Y For service or information

2020 HIGH h specifications

Turbo Chef Technologies is renowned for its innovative approach to commercial cooking, and the 2020 HIGH h model exemplifies this commitment to excellence. This advanced cooking appliance is designed to optimize kitchen operations while delivering exceptional cooking results.

One of the defining features of the 2020 HIGH h is its unique combination of high-speed cooking technologies. Utilizing a blend of convection, impingement, and microwave heating, this oven significantly reduces cooking times compared to conventional ovens without compromising food quality. The result is perfectly cooked dishes that retain flavor and moisture, making it an ideal choice for restaurants, cafes, and other food service establishments.

The 2020 HIGH h also boasts Turbo Chef’s patented Air-Flow technology. This innovation ensures that heat is distributed evenly throughout the cooking chamber, allowing for consistent results across multiple batches. Whether baking, roasting, or reheating, operators can trust that every dish will emerge evenly cooked and ready to serve.

Another noteworthy aspect of the 2020 HIGH h is its user-friendly interface. Equipped with programmable settings, it allows operators to create customized cooking profiles for various menu items. This feature not only streamlines operations but also empowers staff to maintain food quality even during peak service hours.

The oven's sleek design and compact footprint make it particularly valuable for kitchens with limited space. Despite its size, the 2020 HIGH h offers ample cooking capacity, often accommodating multiple trays of food simultaneously.

Energy efficiency is another key characteristic of the 2020 HIGH h. Designed to minimize energy consumption while maximizing output, this oven is an excellent choice for businesses looking to reduce their environmental footprint without sacrificing performance.

The durability of the 2020 HIGH h cannot be overlooked. Built with high-quality materials, it is engineered to withstand the rigors of a busy kitchen environment, ensuring longevity and reliability.

In conclusion, Turbo Chef Technologies’ 2020 HIGH h model represents the pinnacle of modern cooking solutions. With its advanced cooking technologies, user-friendly design, and energy efficiency, it is a game-changer for culinary professionals seeking speed, consistency, and superior results in their kitchens. As the food service industry continues to evolve, the 2020 HIGH h stands ready to meet the demands of chefs and operators alike.
Top Page Image Contents