Turbo Chef Technologies 2020 HIGH h manual Important Safety Information Please Read First

Page 7

Important Safety Information – Please Read First

Improper installation, adjustment, alteration, service, or maintenance of this equipment can cause property damage, injury, or death. Thoroughly read the installation, operating, and maintenance instructions before installing or servicing this equipment. Strictly adhere to the following safety information to reduce the risk of:

￿Damage to the oven

￿Damage to property near the oven

￿Personal injury

￿Burns

￿Fire

￿Electric shock

General Safety Information

￿Use this appliance only for its intended uses as described in this manual.

￿Only qualified service personnel should service this appliance. Contact the nearest authorized service facility for examination, repair, or adjustment.

￿Always ensure the oven is disconnected from the power supply before servicing, repairing, or adjusting any components or parts.

￿x DO NOT place the cord near heated surfaces.

￿x DO NOT store or use flammable vapors or liquids (e.g., gasoline) in the vicinity of this appliance. ￿x DO NOT allow children to use this appliance.

￿x DO NOT place corrosive chemicals or vapors in this appliance. It is not designed for industrial or laboratory use.

￿x DO NOT operate this appliance if it: Has a damaged cord or plug

Is not working properly

Has been damaged or dropped

￿x DO NOT cover or block any openings on this appliance. ￿x DO NOT store this appliance outdoors.

￿x DO NOT use this appliance near water.

￿x DO NOT immerse this appliance or any of its components (e.g., cord, plug, etc.) in water. ￿x DO NOT let the cord hang over the edge of a table or counter.

Reducing Fire Risk

If materials inside the oven ignite or if smoke is observed,

1.Keep the oven door closed.

2.Turn off the oven.

3.Disconnect the power cord or shut off power at the fuse/circuit breaker panel.

￿Carefully attend the oven if paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking.

￿x DO NOT leave items in the cook cavity when the oven is not in use. ￿x DO NOT cook items wrapped in cling wrap or plastic film.

￿x DO NOT overcook food.

i

SAFET Y INFORMATION

Image 7
Contents Accelerating the World of Cooking TM Page For further information, call Page Table of Contents Oven Modes General Safety Information Important Safety Information Please Read FirstReducing Fire Risk Preventing Oven Damage Power Cord ReplacementGrounding Instructions Conveyor DimensionsElectrical Specifications ExteriorOven Construction Installation InstructionsPackaging CertificationsInstallation Near Open Heat Source Oven Location and PlacementVentilation Requirements Approved cleaner, part number Daily Cleaning InstructionsTurn the Oven Off Weekly Cleaning InstructionsRemove Inner Oven Components Clean Oven Components Ready the Oven for Use Oven Controls Mode 2 Belt Speed Select Mode 1 Oven OffCooking a Product Mode 7 Idle Mode 3 WarmingMode 4 Soaking Mode 6 Cooling DownChanging a Cooking Profile Name Editing a Cooking ProfileAdjusting the Temperature Adjusting the Belt SpeedAdjusting the Top and Bottom Air Accessing the Setup Mode Config ModeSetup Mode Accessing the Fault Count ScreenChanging the Display Temperature Updating the Firmware Issue Possible Causes Resolution O U B L E S H O OT I N G Part Description TurboChef Part Number Replaceable PartsNorth America Limited Warranty Warranty Service, Exclusive Remedy Disclaimer of Damages International Limited Warranty Warranty Service International Limited Warrant Y International Limited Warrant Y For service or information

2020 HIGH h specifications

Turbo Chef Technologies is renowned for its innovative approach to commercial cooking, and the 2020 HIGH h model exemplifies this commitment to excellence. This advanced cooking appliance is designed to optimize kitchen operations while delivering exceptional cooking results.

One of the defining features of the 2020 HIGH h is its unique combination of high-speed cooking technologies. Utilizing a blend of convection, impingement, and microwave heating, this oven significantly reduces cooking times compared to conventional ovens without compromising food quality. The result is perfectly cooked dishes that retain flavor and moisture, making it an ideal choice for restaurants, cafes, and other food service establishments.

The 2020 HIGH h also boasts Turbo Chef’s patented Air-Flow technology. This innovation ensures that heat is distributed evenly throughout the cooking chamber, allowing for consistent results across multiple batches. Whether baking, roasting, or reheating, operators can trust that every dish will emerge evenly cooked and ready to serve.

Another noteworthy aspect of the 2020 HIGH h is its user-friendly interface. Equipped with programmable settings, it allows operators to create customized cooking profiles for various menu items. This feature not only streamlines operations but also empowers staff to maintain food quality even during peak service hours.

The oven's sleek design and compact footprint make it particularly valuable for kitchens with limited space. Despite its size, the 2020 HIGH h offers ample cooking capacity, often accommodating multiple trays of food simultaneously.

Energy efficiency is another key characteristic of the 2020 HIGH h. Designed to minimize energy consumption while maximizing output, this oven is an excellent choice for businesses looking to reduce their environmental footprint without sacrificing performance.

The durability of the 2020 HIGH h cannot be overlooked. Built with high-quality materials, it is engineered to withstand the rigors of a busy kitchen environment, ensuring longevity and reliability.

In conclusion, Turbo Chef Technologies’ 2020 HIGH h model represents the pinnacle of modern cooking solutions. With its advanced cooking technologies, user-friendly design, and energy efficiency, it is a game-changer for culinary professionals seeking speed, consistency, and superior results in their kitchens. As the food service industry continues to evolve, the 2020 HIGH h stands ready to meet the demands of chefs and operators alike.