Turbo Chef Technologies 2020 HIGH h manual Mode 3 Warming, Mode 4 Soaking, Mode 6 Cooling Down

Page 18

10 STANDARD OVEN OPERATION

Mode 3: Warming

Mode during which the oven warms to the preset cooking temperature defined by the cooking profile that was selected.

Happens When...

-A selection is made from MODE 2, and the oven’s temperature at the beginning of warmup was not within (less than) 25°F (14°C) of the oven’s set temperature.

Goes To...

-MODE 4 once the oven has reached the temperature defined by the selected cooking profile.

-MODE 6 when the user presses the back/off key and the oven is above 150°F (66°C).

Mode 4: Soaking

Mode during which the oven has completed warming up and automatically allows an additional five minutes for the oven cavity surfaces to warm.

Happens When...

- MODE 3 completes (within 5°F [3°C] of set point)

Goes To...

-MODE 5 when soaking completes.

-MODE 6 when the user presses the back/off key and the oven is above 150°F (66°C).

Mode 6: Cooling Down

Mode during which the burner assembly shuts off to allow the oven to cool.

Happens When...

-The user presses the back/off key from MODE 3 (and the oven temperature is above 150°F [66°C]), or from MODES 4, 5, or 7.

Goes To...

-MODE 1 when the oven temperature has receded below 150°F (66°C).

-MODE 2 when the user selects a cooking profile.

Mode 7: Idle

Mode during which both blowers are reduced to 30% and the belt speed reduces to 20 minutes to save power. All other oven components remain the same.

Happens When...

-The user presses the idle key from MODE 5.

Goes To...

-MODE5 when the user presses the idle key, up key, down key, or any soft key.

-MODE6 when the user presses the back/off key.

Mode 5: Cooking

Mode during which the oven is ready to cook. The user can place food on the conveyor to cook, or edit cook settings if the full edit or flex option is enabled. See page 11 for more information on full edit and flex options.

Happens When...

-MODE 4 completes.

-The user presses the idle key, up key, down key, or any soft key during MODE 7.

Goes To...

-MODE 6 when the user presses the back/off key.

-MODE 7 when the user presses the idle key.

-MODE 3 if the temperature drops 25°F (14°C) or more below the set point.

Image 18
Contents Accelerating the World of Cooking TM Page For further information, call Page Table of Contents Oven Modes Important Safety Information Please Read First General Safety InformationReducing Fire Risk Power Cord Replacement Preventing Oven DamageGrounding Instructions Exterior DimensionsElectrical Specifications ConveyorCertifications Installation InstructionsPackaging Oven ConstructionOven Location and Placement Installation Near Open Heat SourceVentilation Requirements Daily Cleaning Instructions Approved cleaner, part numberWeekly Cleaning Instructions Turn the Oven OffRemove Inner Oven Components Clean Oven Components Ready the Oven for Use Oven Controls Mode 1 Oven Off Mode 2 Belt Speed SelectCooking a Product Mode 6 Cooling Down Mode 3 WarmingMode 4 Soaking Mode 7 IdleEditing a Cooking Profile Changing a Cooking Profile NameAdjusting the Belt Speed Adjusting the TemperatureAdjusting the Top and Bottom Air Accessing the Fault Count Screen Config ModeSetup Mode Accessing the Setup ModeChanging the Display Temperature Updating the Firmware Issue Possible Causes Resolution O U B L E S H O OT I N G Replaceable Parts Part Description TurboChef Part NumberNorth America Limited Warranty Warranty Service, Exclusive Remedy Disclaimer of Damages International Limited Warranty Warranty Service International Limited Warrant Y International Limited Warrant Y For service or information

2020 HIGH h specifications

Turbo Chef Technologies is renowned for its innovative approach to commercial cooking, and the 2020 HIGH h model exemplifies this commitment to excellence. This advanced cooking appliance is designed to optimize kitchen operations while delivering exceptional cooking results.

One of the defining features of the 2020 HIGH h is its unique combination of high-speed cooking technologies. Utilizing a blend of convection, impingement, and microwave heating, this oven significantly reduces cooking times compared to conventional ovens without compromising food quality. The result is perfectly cooked dishes that retain flavor and moisture, making it an ideal choice for restaurants, cafes, and other food service establishments.

The 2020 HIGH h also boasts Turbo Chef’s patented Air-Flow technology. This innovation ensures that heat is distributed evenly throughout the cooking chamber, allowing for consistent results across multiple batches. Whether baking, roasting, or reheating, operators can trust that every dish will emerge evenly cooked and ready to serve.

Another noteworthy aspect of the 2020 HIGH h is its user-friendly interface. Equipped with programmable settings, it allows operators to create customized cooking profiles for various menu items. This feature not only streamlines operations but also empowers staff to maintain food quality even during peak service hours.

The oven's sleek design and compact footprint make it particularly valuable for kitchens with limited space. Despite its size, the 2020 HIGH h offers ample cooking capacity, often accommodating multiple trays of food simultaneously.

Energy efficiency is another key characteristic of the 2020 HIGH h. Designed to minimize energy consumption while maximizing output, this oven is an excellent choice for businesses looking to reduce their environmental footprint without sacrificing performance.

The durability of the 2020 HIGH h cannot be overlooked. Built with high-quality materials, it is engineered to withstand the rigors of a busy kitchen environment, ensuring longevity and reliability.

In conclusion, Turbo Chef Technologies’ 2020 HIGH h model represents the pinnacle of modern cooking solutions. With its advanced cooking technologies, user-friendly design, and energy efficiency, it is a game-changer for culinary professionals seeking speed, consistency, and superior results in their kitchens. As the food service industry continues to evolve, the 2020 HIGH h stands ready to meet the demands of chefs and operators alike.