Turbo Chef Technologies 2020 HIGH h Config Mode, Setup Mode, Accessing the Fault Count Screen

Config Mode

The CONFIG MODE (Figure 11) serves four main purposes:

1.To access the smart card screen.

2.To access the fault count screen.

3.To access the SETUP MODE.

4.To access the TEST MODE (service use only).

To access the CONFIG MODE, press the up key from

the OVEN OFF MODE.

Accessing the Fault Count Screen

From the CONFIG MODE (Figure 11), press R1 to access the fault counts screen (Figure 15). The oven will display the number of faults that have occurred.

Accessing the Setup Mode

From the CONFIG MODE (Figure 11), press L1 to access the SETUP MODE. The SETUP MODE allows the user to customize several oven settings - see below for more details.

13

Smart Card Screen (Loading a Menu)

The smart card screen allows the user to -Load a menu from smart card to oven. -Save a menu from oven to smart card.

To load or save a menu,

1.Press L3 (Figure 11) to access the smart card screen (Figure 12).

2.Insert a smart card into the smart card slot (Figures 13 and 14), with the gold chip facing the front of the oven.

3.Load or save a menu.

-Press R1 to load a menu from the smart card to the oven (Figure 12).

-Press R2 to save a menu from the oven to the smart card (Figure 12).

L1	SETUP	FAULTS R1
L2	CONFIG MENU
		R2
L3	SMARTCARD	TEST MODE
		R3

Figure 11: Config Mode

L1	LOAD FROM CARD	R1
L2	SMARTCARD	R2
	SAVE TO CARD
L3		R3

Figure 12: Smart Card Screen

Setup Mode

Figure 16, page 14.

The SETUP MODE serves four main purposes:

1.To change the display temperature.

2.To access the edit option screen.

3.To change the display language.

4.To access the info screen.

To access SETUP MODE, press the up key from the

OVEN OFF or COOLING DOWN MODE (to access the

CONFIG MODE), and then press L1.

Figure 13: Loading a Smart Card

L1	INSERT SMART CARD	R1
L2		R2
L3	PRESS [BACK] TO EXIT	R3

Figure 14: Insert Smart Card Screen

OVEN MODES