cleaning an maintenance features
OVEN DOOR REMOVAL
Open oven door to first stop position. Hold the door firmly at sides, lift up and away from the range To replace, slip hinge arms into door slots_ and with hand or
knee push door in at bottom until it cricks Then close door
TO REMOVE
(for those models with a }ight)
HOW TO USE THE OVEN LIGHT SWITCH The oven light can be turned OFF by a control button located on the right end of the control panei Press in to turn fight on and off
REPLACING THE OVEN LIGHT (some models) Do not touch the oven bulb when hoL with wet hands or wipe oven light area with wet cloth Unscrew the bulb and replace with a 40 watt, t30 volt appliance bulb An appliance bulb is smaller than a standard 40 watt household bulb The t30 volt bulb is made to withstand
high oven temperatures and gives you a much longer bulb life A t20 volt bulb may be used but life
expectancy is much shorter
To change the bulb, on models having a glass lens held in place with a spring wire to protect the oven bulb from heat
=Swing the wire al! the way to the side and hold it so glass _ens can be lifted off
=Unscrew bulb and replace with a 40 watt appliance bulb
•Place glass lens over socket and swing wire back up over tens
o The glass iens must be in place whenever the oven is in use
@ @--©
STORAGE DRAWER
This drawer gives you extra space for keeping cookware and bakeware
Do not keep plastics and flammable materials in this drawer
TO REPLACE
REMOVABLE OVEN RACKS
The oven racks can be removed for easy cleaning Pull the rack out and up. in one motion to remove
Make sure your racks are inserted correctly The straight racks should have the back bar curved up and facing the rear of the oven The offset rack (666 Series) has the offset facing up with the two wire tabs to the rear
i
18