Kenmore How to Remove, Clean, and Replace Your Oven Door

Page 34

Care

& Cleaning

 

 

 

Removing and Replacing the Oven Door

 

 

 

The

oven door is heavy.

Be careful

when

Door Hinge

removing

and lifting

the door. Do not lift the oven

door by

locations

the handle.

 

 

 

 

with oven door

 

 

 

 

 

 

Most

oven doors contain

glass that

can

fully open

break. Read the following recommendations:

 

 

° Do not close the oven door until a[I the interior oven racks

 

are fully inserted and retracted to the back of the oven.

Figure

°Do not hit the glass with pots, pans, or any other object. The oven door glass may break or even break at a later time unexpectedly.

°Scratching, hitting, jarring or stressing the oven door glass may weaken its structure causing an increased risk of breakage at a later time.

°You may use a glass cleaner on the outside of the oven door glass. Do not spray or allow water or the cleaner to enter or drip down into the oven door vents. Spray cleaner on cloth first and then wipe the oven door clean.

°Do not use strong oven cleaners, powders or any harsh abrasive cleaning materials on the outside of the oven door or glass.

Figure 2

°Never clean the oven door gasket. The oven door gasket should always clean during the Self-clean cycle.

To Remove Oven Door:

1.Open oven door completely (horizontal with floor - See Figure 1).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small fiat=

blade screwdriver may be required.

Oven door

 

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the

oven door hinge arms over the roller pins located on

Figure 3

each side of the oven frame (See Figure 4).

 

To Replace Oven Door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm onto the roller pins located on each side of the oven door frame (See Fig. 4). Also, seat the notch of the hinge arm onto the bottom of the slot at the same time you seat the hook. The hook and notch of the hinge arms must be fully seated onto the roller pins and bottom of the slot.

3.Fully open the oven door (horizontal with floor - See Figure 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Figure 2) to the locked position.

5.Close the oven door.

Roller pin

Hinge arm hook

Hinge arm notch

Slot bottom

Figure 4

34

Image 34
Contents English / Espaol Models/Modelos Color numbe3 n0mero de colorContents All instructions given Properly installed anti=tip bracketRead all Instructions Before Tape PackagingService without breaking due to the sudden Recommendations for cooktop useProtective liners--DO not USE Aluminum Clean Ventilating Hoods Frequently--GreaseAvoid scratching the cooktop glass with sharp objects Features at a Glance Your Range includesAir Circulation in the Oven Before Setting Oven ControlsOven Vent Location Arranging OvenInduction Cooktop Features Surface Cookware RecommendationsMinimum Pan Size Requirements Before Setting Surface ControlsInduction Cookware Bottoms should not extend more thanHot Element Indicator Message HE Available Power Level SettingsSabbath Feature Sb Message Cooktop Display WindowsInduction Cooking Zones Setting Surface ControlsPower Boost Feature To Operate the induction Cooking ZonesOperational Noises Power SharingYour induction cooktop Recommended Rack Position for Broiling, Baking and Roasting Oven Control FunctionsMin Preheat Temperature Display Setting Clock at Power UpTo Set Add 1 Minute Feature Setting Oven LockoutPreheat Setting Oven ControlsSetting bake BakeDelay Start with cook time Cook TimeSetting Oven Controls Convection BakeFor best results Convection ConvertPress Conv Convert Maximum 550F / 288C Benefits of convection roast Convection RoastPork WelghfCook tlme Setting BrollBroil Or 4thCakes Breads Warm & Hold TMMeat Probe Proper probe placementTo Set Meat Probe Meat Probe contd To Set Meat ProbeUnder Bake pad PressBAKi. The stored recipe is recalled PressSTARTExample below shows how to cancel the Sabbath mode Sabbath ModeCancelling Sabbath mode PadsWarmer Drawer Controls Warmer drawer indicator lightWarm & Ready TM Drawer Arranging warmer drawer rack positionsItem Setting Warmer Drawer SettingsWarmer drawer recommended food settings Proof BreadSetting Silent Control Operation Setting ClockAdjusting Oven Temperature Setting 12hr Energy Saving ModeWhat to Expect during Cleaning Before Starting Self-CleanHand Clean Door Remove any excessive spillovers in the oven cavityPress Flex Clean Self-Cleaning CycleFlex Clean Cycle Press Delay StartCare & Cleaning Do not Cooktop MaintenanceCooktop Cleaning For light to moderate soilReplacing the Halogen Oven Light Cooktop Cleaning contdDo not use the followlng on the cookfop Removing and Replacing the Oven Door Care CleaningTo Replace Oven Door Removincj and Replacincj the Drawer To Remove the Drawer Remove the drawer and repeat steps thruOven Baking Brown streaks or specks Is displayed Faulty installationCooking Zone does not heat food Power level flashing Fan noise during cooking OperationSoll not completely removed Protection Agreements Master Protection AgreementsOur Home Your HomeCanada