Craftsman 917.272051 owner manual Cleaning, To Remove Mower, To Install Mower

Page 21

CLEANING

Clean en_]ine, battery, seat, finish, etc.

iof all foreign matter.

Keep finished surfaces and wheels free of all gasoline, oil, etc.

• Protect painted surfaces with automo-

tive type wax.

We do not recommend using a garden

hose to clean your tractor unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in a short- ened engine life.

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place gearshift lever in neutral (N) position.

3, Place attachment clutch in "DISENGAGED" position. 4, Turn ignition key "OFF" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the

right side of tractor.

1.Place attachment clutch in "DISEN-

GAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and lift clutch spdng off pulley bolt.

5.Remove large retainer spring, slide

collar oft and push housing guide out of bracket.

6.Disconnect anti-awaybar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer springs.

8.Disconnect front links from deck by removing retainer springs.

9.Raise lift lever to raise suspension arms. Slide mower out from under tractor.

Small RetainerSpring

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook

the clutch spring into square hole in frame.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with discharge guard to right side of tractor.

3.Lower lift lever to its lowest position.

4.Install mower in reverse order of removal instructions.

Clutch Sprin

Anti-Sway

Springs

Collar

(Both Sides)

 

Housing Guide

Large Retainer Spring

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Icraftsmanj Limited 90 DAY Warranty on Battery Limited Twoyear Warranty on Craftsman Riding Equipment PartsGeneral Operation Serious injury or deathWhile on the slope Follow the manufacturers recommen Do notAdjust and service as required IV. ServiceHi. Children Responsible adultSafety is Involved Park Plug Product SpecificationsRepair Agreement Customer ResponsibilitiesSteering Remove all accessible loose parts Tools Required for AssemblyHowto SET Upyourtractor Check Battery Before Removingtractor from Skid Attach Steering WheelAdjust seat before tightening adjustment knob Install SeatTo Drivetractor OFF Skid Operation section for location al function of controlsInstall Mulcher Plate R N H L Knowyourtractor Your Tractor Stopping Howto Useyourtractor To SET Parking BrakeEngine To USE Throttle ControlGauge Wheel To Adjust Gauge WheelsTo Operate Mower To Stop Mower BladesBefore Startingthe Engine Check Engine OIL Level Towing Carts and Other AttachmentsADD Gasoline To Start EngineMowingtips Mower should be properly leveled forMulching Mowingtips Lubrication Chart Maintenance ScheduleGeneral Recommendations Before Each USETractor Clean AIR INTAKE/COOLING Areas Clean AIR ScreenBelts Transaxle CoolingMuffler AIR FilterSpark Plugs Engine OIL FilterTo Install Mower CleaningTo Remove Mower Raise attachment lift lever to its highest positionFRONT-TO-BACK Adjustment To Level Mower HousingOn level ground or driveway. Make sure JLiftLink Ustrnent NutTo Adjust Brake Belt InstallationTo Replace Mower Blade Drive Belt Belt RemovalTransaxle Gear Shift Lever Neutral Adjustment To Start Engine with a Weak BatteryTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-INJCAMBERTo Remove Hood and Grill Assembly Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysAdjusting To Adjust CarburetorCable BracketEngine Fuel System BatferyEngineoil CylindersTroubleshooting Chart ProblemCause Correction Troubleshooting Chart Problem Cause Correction Troubleshooting Chart ProblemcauseTractor - Model Number SchematicElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.272051 Chassis and Enclosures KEY Part Description Tractor - Model Number Chassis and EnclosuresTractor - Model Number Ground Drive Description KEY PartTractor - Model Number 917.272051 Steering Assembly KEY Part Description TRACTOR- Model Number Steering AssemblySpark Arrester TRACTOR-- Model NumberTRACTOR- Model Number Seat Assembly Wheels &TIRES DecalsTRACTOR- Model Number Lift Assembly Tractor - Model Number Mower Deck +-j,j+,. lNots Allcomponent dimensions givenin U.S. inches Peerless Transaxle - Model Number 206-545C 778345 @/---L Valve, exhaust Std Blower Housing and Baffles l IGNITION/ELECTRICAL KEY Part Description Blower Housing & Baffles KEY Part DescriptionNot Illustrated AIR INTAKE/FILTRATION KEY Part Description20\ Starting System KEY Part Description OIL PAN/LUBRICATION KEY Part DescriptionEngine Controls KEY Exhaust J Exhaust KEY Part Description Fuel System KEY Part DescriptionPage Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.272051 specifications

The Craftsman 917.272051 is a robust and versatile lawn tractor designed to meet the diverse needs of homeowners and landscape enthusiasts. With its powerful engine and user-friendly features, this model stands out in its class, providing a reliable solution for maintaining a pristine lawn.

One of the standout features of the Craftsman 917.272051 is its impressive 20 HP Briggs & Stratton engine. This air-cooled, single-cylinder engine is designed to deliver robust performance, making it easy to tackle a variety of mowing tasks. The engine's reliable starting system ensures minimal downtime, allowing users to efficiently manage their mowing schedule.

The cutting deck of the 917.272051 is another highlight, measuring 42 inches in width. This size strikes a balance between maneuverability and efficiency, enabling users to navigate tight spaces while still covering a generous amount of terrain in one pass. The deck also features a deck wash system, allowing for easy cleaning and maintenance after use, which helps extend its lifespan and maintain optimal performance.

Equipped with a 6-speed transmission, the Craftsman 917.272051 offers users the flexibility to choose the appropriate speed for various mowing conditions. This feature enhances control and allows for a smoother cutting experience, whether tackling overgrown grass or maintaining a manicured lawn.

Another significant aspect of the Craftsman 917.272051 is its comfortable, ergonomic design. The high-back seat provides ample support during extended mowing sessions, reducing fatigue and improving the overall experience. Additionally, the steering wheel is positioned to offer ease of handling, making it accessible even for users with less experience.

Safety features are also a priority in the design of the 917.272051. The tractor includes a built-in safety switch, which automatically disengages the blades when the operator leaves the seat. This feature adds a crucial layer of safety, protecting users from accidents while ensuring the mower functions efficiently.

Overall, the Craftsman 917.272051 lawn tractor combines power, performance, and user-friendly features, making it an excellent choice for homeowners seeking a dependable tool for lawn care. With its durable construction and advanced technologies, this model is equipped to handle the rigors of regular use, ensuring a well-maintained yard season after season.
Top Page Image Contents