Craftsman 917.272051 owner manual Howto Useyourtractor To SET Parking Brake, Stopping, Engine

Page 13

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOWTO USEYOURTRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator

presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal into full "BRAKE" position and hold.

2.Place parking brake lever in "EN- GAGED" position and release

pressure from clutch/brake pedal. Pedal should remain in "BRAKE"

position. Make sure parking brake will hold tractor secure.

Attachment Clutch Lever "Engaged" Position

Throttle/

Choke

Brake

Clutch/

Brake

rshitt

Lever

"BI

"Disengaged

PositionPosition

STOPPING

MOWER BLADES -

•To Stop mower blades,move attach- ment clutch lever to "DISENGAGED" position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal into full "BRAKE" position.

•Move gearshift lever to neutral (N) position.

ENGINE-

•Move throttle control to slow position. NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to "backfire".

•Turn ignition key to "OFF" position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than "OFF" will

cause the battery to be discharged, (dead).

NOTE; Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

_,CAUTION: Always stop tractor

completely, as described above, before leaving the operator'sposition; to empty grass catcher, etc.

TO USE THROTTLE CONTROL

Always operate engine at full throttle.

•Operating engine at less than full

throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower performance.

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the gearshift lever.

1.Start tractor with clutch/brake pedal depressed and gearshift lever in neutral (N) position.

2.Move gearshift lever to desired position.

3.Slowly release clutch/brake pedal to stad movement.

IMPORTANT= Bring tractor to a complete stop before shifting or changing gears.

Failure to do so will shorten the useful life of your transaxle.

TO ADJUST MOWER CU'I-rlNG HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These

heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Icraftsmanj Limited 90 DAY Warranty on Battery Limited Twoyear Warranty on Craftsman Riding Equipment PartsGeneral Operation Serious injury or deathWhile on the slope Follow the manufacturers recommen Do notAdjust and service as required IV. ServiceHi. Children Responsible adultSafety is Involved Park Plug Product SpecificationsRepair Agreement Customer ResponsibilitiesSteering Remove all accessible loose parts Tools Required for AssemblyHowto SET Upyourtractor Check Battery Before Removingtractor from Skid Attach Steering WheelAdjust seat before tightening adjustment knob Install SeatTo Drivetractor OFF Skid Operation section for location al function of controlsInstall Mulcher Plate R N H L Knowyourtractor Your Tractor Stopping Howto Useyourtractor To SET Parking BrakeEngine To USE Throttle ControlGauge Wheel To Adjust Gauge WheelsTo Operate Mower To Stop Mower BladesBefore Startingthe Engine Check Engine OIL Level Towing Carts and Other AttachmentsADD Gasoline To Start EngineMower should be properly leveled for MowingtipsMulching Mowingtips Lubrication Chart Maintenance ScheduleGeneral Recommendations Before Each USETractor Clean AIR INTAKE/COOLING Areas Clean AIR ScreenBelts Transaxle CoolingMuffler AIR FilterSpark Plugs Engine OIL FilterTo Install Mower CleaningTo Remove Mower Raise attachment lift lever to its highest positionFRONT-TO-BACK Adjustment To Level Mower HousingOn level ground or driveway. Make sure JLiftLink Ustrnent NutTo Adjust Brake Belt InstallationTo Replace Mower Blade Drive Belt Belt RemovalTransaxle Gear Shift Lever Neutral Adjustment To Start Engine with a Weak BatteryTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-INJCAMBERTo Remove Hood and Grill Assembly Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysAdjusting To Adjust CarburetorCable BracketEngine Fuel System BatferyEngineoil CylindersProblem Troubleshooting ChartCause Correction Troubleshooting Chart Problem Cause Correction Troubleshooting Chart ProblemcauseTractor - Model Number SchematicElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.272051 Chassis and Enclosures KEY Part Description Tractor - Model Number Chassis and EnclosuresTractor - Model Number Ground Drive Description KEY PartTractor - Model Number 917.272051 Steering Assembly KEY Part Description TRACTOR- Model Number Steering AssemblySpark Arrester TRACTOR-- Model NumberTRACTOR- Model Number Seat Assembly Wheels &TIRES DecalsTRACTOR- Model Number Lift Assembly Tractor - Model Number Mower Deck +-j,j+,. lNots Allcomponent dimensions givenin U.S. inches Peerless Transaxle - Model Number 206-545C 778345 @/---L Valve, exhaust Std Blower Housing and Baffles l IGNITION/ELECTRICAL KEY Part Description Blower Housing & Baffles KEY Part DescriptionNot Illustrated AIR INTAKE/FILTRATION KEY Part Description20\ OIL PAN/LUBRICATION KEY Part Description Starting System KEY Part DescriptionEngine Controls KEY Exhaust J Exhaust KEY Part Description Fuel System KEY Part DescriptionPage Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.272051 specifications

The Craftsman 917.272051 is a robust and versatile lawn tractor designed to meet the diverse needs of homeowners and landscape enthusiasts. With its powerful engine and user-friendly features, this model stands out in its class, providing a reliable solution for maintaining a pristine lawn.

One of the standout features of the Craftsman 917.272051 is its impressive 20 HP Briggs & Stratton engine. This air-cooled, single-cylinder engine is designed to deliver robust performance, making it easy to tackle a variety of mowing tasks. The engine's reliable starting system ensures minimal downtime, allowing users to efficiently manage their mowing schedule.

The cutting deck of the 917.272051 is another highlight, measuring 42 inches in width. This size strikes a balance between maneuverability and efficiency, enabling users to navigate tight spaces while still covering a generous amount of terrain in one pass. The deck also features a deck wash system, allowing for easy cleaning and maintenance after use, which helps extend its lifespan and maintain optimal performance.

Equipped with a 6-speed transmission, the Craftsman 917.272051 offers users the flexibility to choose the appropriate speed for various mowing conditions. This feature enhances control and allows for a smoother cutting experience, whether tackling overgrown grass or maintaining a manicured lawn.

Another significant aspect of the Craftsman 917.272051 is its comfortable, ergonomic design. The high-back seat provides ample support during extended mowing sessions, reducing fatigue and improving the overall experience. Additionally, the steering wheel is positioned to offer ease of handling, making it accessible even for users with less experience.

Safety features are also a priority in the design of the 917.272051. The tractor includes a built-in safety switch, which automatically disengages the blades when the operator leaves the seat. This feature adds a crucial layer of safety, protecting users from accidents while ensuring the mower functions efficiently.

Overall, the Craftsman 917.272051 lawn tractor combines power, performance, and user-friendly features, making it an excellent choice for homeowners seeking a dependable tool for lawn care. With its durable construction and advanced technologies, this model is equipped to handle the rigors of regular use, ensuring a well-maintained yard season after season.
Top Page Image Contents