Craftsman 917.272051 Towing Carts and Other Attachments, ADD Gasoline, To Start Engine

Page 15

TOWING CARTS AND OTHER

ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing, Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the

ground and cause you to lose control of your tractor.

BEFORE STARTINGTHE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Unthread and remove oil fill cap/ dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do not thread the cap onto the tube. Remove and read oil level. If necessary, add oil until "FULL" mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See "OIL VISCOSITY CHART" in the Mainte-

nance section of this manual).

To change engine oil, see the Mainte- nance section in this manual

"\ _:.;_-_1_7:_0il Fill Cap/

\ _ _,'_ - Dipstick

}

ADD GASOLINE

Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline will increase carbon and lead oxide

deposits and reduce valve life). Do not mix oil with gasoline, Purchase fuel in quantities that can be used within 30

days to assure fuel freshness, IMPORTANT: When operating in

temperatures below 32°F(0°C), use fresh, clean winter grade gasoline to help

. insure good cold weather starting.

WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines

and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Sit on seat in operating position, depress clutclVbrake pedal and set parking brake.

2.Place gear shift lever in neutral (N) position.

3.Move attachment clutch to "DISEN- GAGED" position.

4.Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below.

5.Insert key into ignition and turn key clockwise to "START" position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast

position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

WARM WEATHER STARTING (50° F and above)

6. When engine starts, move the throttle control to the fast position.

The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

15

Image 15
Contents Icraftsmanj Limited 90 DAY Warranty on Battery Limited Twoyear Warranty on Craftsman Riding Equipment PartsDo not Serious injury or deathGeneral Operation While on the slope Follow the manufacturers recommenResponsible adult IV. ServiceAdjust and service as required Hi. ChildrenSafety is Involved Customer Responsibilities Product SpecificationsPark Plug Repair AgreementSteering Before Removingtractor from Skid Attach Steering Wheel Tools Required for AssemblyRemove all accessible loose parts Howto SET Upyourtractor Check BatteryOperation section for location al function of controls Install SeatAdjust seat before tightening adjustment knob To Drivetractor OFF SkidInstall Mulcher Plate R N H L Knowyourtractor Your Tractor To USE Throttle Control Howto Useyourtractor To SET Parking BrakeStopping EngineTo Stop Mower Blades To Adjust Gauge WheelsGauge Wheel To Operate MowerTo Start Engine Towing Carts and Other AttachmentsBefore Startingthe Engine Check Engine OIL Level ADD GasolineMowingtips Mower should be properly leveled forMulching Mowingtips Before Each USE Maintenance ScheduleLubrication Chart General RecommendationsTractor Transaxle Cooling Clean AIR ScreenClean AIR INTAKE/COOLING Areas BeltsEngine OIL Filter AIR FilterMuffler Spark PlugsRaise attachment lift lever to its highest position CleaningTo Install Mower To Remove MowerJLiftLink Ustrnent Nut To Level Mower HousingFRONT-TO-BACK Adjustment On level ground or driveway. Make sureBelt Removal Belt InstallationTo Adjust Brake To Replace Mower Blade Drive BeltFront Wheel TOE-INJCAMBER To Start Engine with a Weak BatteryTransaxle Gear Shift Lever Neutral Adjustment To Adjust Steering Wheel ALIGN- MentInterlocks and Relays Replacing BatteryTo Remove Hood and Grill Assembly To Replace Headlight BulbBracket To Adjust CarburetorAdjusting CableCylinders BatferyEngine Fuel System EngineoilTroubleshooting Chart ProblemCause Correction Troubleshooting Chart Problem Cause Correction Troubleshooting Chart ProblemcauseTractor - Model Number SchematicElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.272051 Chassis and Enclosures KEY Part Description Tractor - Model Number Chassis and EnclosuresTractor - Model Number Ground Drive Description KEY PartTractor - Model Number 917.272051 Steering Assembly KEY Part Description TRACTOR- Model Number Steering AssemblySpark Arrester TRACTOR-- Model NumberTRACTOR- Model Number Seat Assembly Wheels &TIRES DecalsTRACTOR- Model Number Lift Assembly Tractor - Model Number Mower Deck +-j,j+,. lNots Allcomponent dimensions givenin U.S. inches Peerless Transaxle - Model Number 206-545C 778345 @/---L Valve, exhaust Std Blower Housing and Baffles l AIR INTAKE/FILTRATION KEY Part Description Blower Housing & Baffles KEY Part DescriptionIGNITION/ELECTRICAL KEY Part Description Not Illustrated20\ Starting System KEY Part Description OIL PAN/LUBRICATION KEY Part DescriptionEngine Controls KEY Exhaust J Exhaust KEY Part Description Fuel System KEY Part DescriptionPage Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.272051 specifications

The Craftsman 917.272051 is a robust and versatile lawn tractor designed to meet the diverse needs of homeowners and landscape enthusiasts. With its powerful engine and user-friendly features, this model stands out in its class, providing a reliable solution for maintaining a pristine lawn.

One of the standout features of the Craftsman 917.272051 is its impressive 20 HP Briggs & Stratton engine. This air-cooled, single-cylinder engine is designed to deliver robust performance, making it easy to tackle a variety of mowing tasks. The engine's reliable starting system ensures minimal downtime, allowing users to efficiently manage their mowing schedule.

The cutting deck of the 917.272051 is another highlight, measuring 42 inches in width. This size strikes a balance between maneuverability and efficiency, enabling users to navigate tight spaces while still covering a generous amount of terrain in one pass. The deck also features a deck wash system, allowing for easy cleaning and maintenance after use, which helps extend its lifespan and maintain optimal performance.

Equipped with a 6-speed transmission, the Craftsman 917.272051 offers users the flexibility to choose the appropriate speed for various mowing conditions. This feature enhances control and allows for a smoother cutting experience, whether tackling overgrown grass or maintaining a manicured lawn.

Another significant aspect of the Craftsman 917.272051 is its comfortable, ergonomic design. The high-back seat provides ample support during extended mowing sessions, reducing fatigue and improving the overall experience. Additionally, the steering wheel is positioned to offer ease of handling, making it accessible even for users with less experience.

Safety features are also a priority in the design of the 917.272051. The tractor includes a built-in safety switch, which automatically disengages the blades when the operator leaves the seat. This feature adds a crucial layer of safety, protecting users from accidents while ensuring the mower functions efficiently.

Overall, the Craftsman 917.272051 lawn tractor combines power, performance, and user-friendly features, making it an excellent choice for homeowners seeking a dependable tool for lawn care. With its durable construction and advanced technologies, this model is equipped to handle the rigors of regular use, ensuring a well-maintained yard season after season.