Craftsman 917.272051 owner manual Batfery, Engine Fuel System, Engineoil, Cylinders, Other

Page 27

Immediately prepare your tractor for storage at the end of the season or if the

tractor will not be used for 30 days or more.

CAUTION; Never store the tractor

'with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from trac/or for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING" in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual),

3.Lubricate as shown in the Mainte- nance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving paris for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATFERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected

and battery cleaned thoroughly (see

'TO CLEAN BATTERY AND TERMI- NALS" in the Maintenance section of this manual).

After cleaning, leave cables discon- nected and place cables where they cannot come in contact with battery terminals.

if battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposites from forming in essential fuel system parts such as carburetor, fuel

hose, or tank during storage. Also, experiance indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of and engine while in storage.

1.Drain the fuel tank.

2.Start the engine and let it run until the

fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or

storage container. Always follow the mix ratio found on stabilizer container. Run

engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach

the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINEOIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s) into cylinder(s).

3.Tum ignition key to "START" position for a few seconds to distribute oil,

4, Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems,

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows conden-

sation to form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

27

Image 27
Contents Icraftsmanj Limited 90 DAY Warranty on Battery Limited Twoyear Warranty on Craftsman Riding Equipment PartsDo not Serious injury or deathGeneral Operation While on the slope Follow the manufacturers recommenResponsible adult IV. ServiceAdjust and service as required Hi. ChildrenSafety is Involved Customer Responsibilities Product SpecificationsPark Plug Repair AgreementSteering Before Removingtractor from Skid Attach Steering Wheel Tools Required for AssemblyRemove all accessible loose parts Howto SET Upyourtractor Check BatteryOperation section for location al function of controls Install SeatAdjust seat before tightening adjustment knob To Drivetractor OFF SkidInstall Mulcher Plate R N H L Knowyourtractor Your Tractor To USE Throttle Control Howto Useyourtractor To SET Parking BrakeStopping EngineTo Stop Mower Blades To Adjust Gauge WheelsGauge Wheel To Operate MowerTo Start Engine Towing Carts and Other AttachmentsBefore Startingthe Engine Check Engine OIL Level ADD GasolineMowingtips Mower should be properly leveled forMulching Mowingtips Before Each USE Maintenance ScheduleLubrication Chart General RecommendationsTractor Transaxle Cooling Clean AIR ScreenClean AIR INTAKE/COOLING Areas BeltsEngine OIL Filter AIR FilterMuffler Spark PlugsRaise attachment lift lever to its highest position CleaningTo Install Mower To Remove MowerJLiftLink Ustrnent Nut To Level Mower HousingFRONT-TO-BACK Adjustment On level ground or driveway. Make sureBelt Removal Belt InstallationTo Adjust Brake To Replace Mower Blade Drive BeltFront Wheel TOE-INJCAMBER To Start Engine with a Weak BatteryTransaxle Gear Shift Lever Neutral Adjustment To Adjust Steering Wheel ALIGN- MentInterlocks and Relays Replacing BatteryTo Remove Hood and Grill Assembly To Replace Headlight BulbBracket To Adjust CarburetorAdjusting CableCylinders BatferyEngine Fuel System EngineoilTroubleshooting Chart ProblemCause Correction Troubleshooting Chart Problem Cause Correction Troubleshooting Chart ProblemcauseTractor - Model Number SchematicElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.272051 Chassis and Enclosures KEY Part Description Tractor - Model Number Chassis and EnclosuresTractor - Model Number Ground Drive Description KEY PartTractor - Model Number 917.272051 Steering Assembly KEY Part Description TRACTOR- Model Number Steering AssemblySpark Arrester TRACTOR-- Model NumberTRACTOR- Model Number Seat Assembly Wheels &TIRES DecalsTRACTOR- Model Number Lift Assembly Tractor - Model Number Mower Deck +-j,j+,. lNots Allcomponent dimensions givenin U.S. inches Peerless Transaxle - Model Number 206-545C 778345 @/---L Valve, exhaust Std Blower Housing and Baffles l AIR INTAKE/FILTRATION KEY Part Description Blower Housing & Baffles KEY Part DescriptionIGNITION/ELECTRICAL KEY Part Description Not Illustrated20\ Starting System KEY Part Description OIL PAN/LUBRICATION KEY Part DescriptionEngine Controls KEY Exhaust J Exhaust KEY Part Description Fuel System KEY Part DescriptionPage Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.272051 specifications

The Craftsman 917.272051 is a robust and versatile lawn tractor designed to meet the diverse needs of homeowners and landscape enthusiasts. With its powerful engine and user-friendly features, this model stands out in its class, providing a reliable solution for maintaining a pristine lawn.

One of the standout features of the Craftsman 917.272051 is its impressive 20 HP Briggs & Stratton engine. This air-cooled, single-cylinder engine is designed to deliver robust performance, making it easy to tackle a variety of mowing tasks. The engine's reliable starting system ensures minimal downtime, allowing users to efficiently manage their mowing schedule.

The cutting deck of the 917.272051 is another highlight, measuring 42 inches in width. This size strikes a balance between maneuverability and efficiency, enabling users to navigate tight spaces while still covering a generous amount of terrain in one pass. The deck also features a deck wash system, allowing for easy cleaning and maintenance after use, which helps extend its lifespan and maintain optimal performance.

Equipped with a 6-speed transmission, the Craftsman 917.272051 offers users the flexibility to choose the appropriate speed for various mowing conditions. This feature enhances control and allows for a smoother cutting experience, whether tackling overgrown grass or maintaining a manicured lawn.

Another significant aspect of the Craftsman 917.272051 is its comfortable, ergonomic design. The high-back seat provides ample support during extended mowing sessions, reducing fatigue and improving the overall experience. Additionally, the steering wheel is positioned to offer ease of handling, making it accessible even for users with less experience.

Safety features are also a priority in the design of the 917.272051. The tractor includes a built-in safety switch, which automatically disengages the blades when the operator leaves the seat. This feature adds a crucial layer of safety, protecting users from accidents while ensuring the mower functions efficiently.

Overall, the Craftsman 917.272051 lawn tractor combines power, performance, and user-friendly features, making it an excellent choice for homeowners seeking a dependable tool for lawn care. With its durable construction and advanced technologies, this model is equipped to handle the rigors of regular use, ensuring a well-maintained yard season after season.