Craftsman 917.272051 To Replace Mower Blade Drive Belt, Belt Removal, Belt Installation

Page 23

TO REPLACE MOWER BLADE DRIVE BELT

•The mower blade drive belt may be

rel_laced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL-

1.Remove mower from tractor (See "TO

REMOVE MOWER" in this section of this manual).

2.Work belt off both mandrel pulleys and idler pulleys•

3.Pull belt away from mower.

BELT INSTALLATION -

4.Install new belt in reverse order of removal.

5.Make sure belt is in all pulley grooves and inside all belt guides.

6.Install mower in reverse order of removal instructions.

Mandrel

pulley_dlerPulleys

Mandrel"

y

_"

Pulley

 

 

TO ADJUST

BRAKE

 

Your tractor is equipped with an adjust- able brake system which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

1.Depress clutch/brake pedal and engage parking brake.

2.Measure distance between brake

operating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen

jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is neces- sary. Contact a Sears or other qualified sewice center.

With Parking Brake "Engaged"

Nut "A"

Nut

Operating

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

1.Remove mower (See "TO REMOVE

MOWER" in this section of this manual•)

2.Remove belt from stationary idler and clutching idler.

3.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

4.Pull belt toward front of tractor and remove downwards from around engine pulley.

5.Install new belt by reversing above procedure.

Engine

Pulley_

Clutching-------

Idler

Stationary-"

Idler

mranaaxle _. _

Pulley _ - _Jr_" ' ( :_

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Icraftsmanj Limited 90 DAY Warranty on Battery Limited Twoyear Warranty on Craftsman Riding Equipment PartsDo not Serious injury or deathGeneral Operation While on the slope Follow the manufacturers recommenResponsible adult IV. ServiceAdjust and service as required Hi. ChildrenSafety is Involved Customer Responsibilities Product SpecificationsPark Plug Repair AgreementSteering Before Removingtractor from Skid Attach Steering Wheel Tools Required for AssemblyRemove all accessible loose parts Howto SET Upyourtractor Check BatteryOperation section for location al function of controls Install SeatAdjust seat before tightening adjustment knob To Drivetractor OFF SkidInstall Mulcher Plate R N H L Knowyourtractor Your Tractor To USE Throttle Control Howto Useyourtractor To SET Parking BrakeStopping EngineTo Stop Mower Blades To Adjust Gauge WheelsGauge Wheel To Operate MowerTo Start Engine Towing Carts and Other AttachmentsBefore Startingthe Engine Check Engine OIL Level ADD GasolineMulching Mowingtips MowingtipsMower should be properly leveled for Before Each USE Maintenance ScheduleLubrication Chart General RecommendationsTractor Transaxle Cooling Clean AIR ScreenClean AIR INTAKE/COOLING Areas BeltsEngine OIL Filter AIR FilterMuffler Spark PlugsRaise attachment lift lever to its highest position CleaningTo Install Mower To Remove MowerJLiftLink Ustrnent Nut To Level Mower HousingFRONT-TO-BACK Adjustment On level ground or driveway. Make sureBelt Removal Belt InstallationTo Adjust Brake To Replace Mower Blade Drive BeltFront Wheel TOE-INJCAMBER To Start Engine with a Weak BatteryTransaxle Gear Shift Lever Neutral Adjustment To Adjust Steering Wheel ALIGN- MentInterlocks and Relays Replacing BatteryTo Remove Hood and Grill Assembly To Replace Headlight BulbBracket To Adjust CarburetorAdjusting CableCylinders BatferyEngine Fuel System EngineoilCause Correction Troubleshooting ChartProblem Troubleshooting Chart Problem Cause Correction Troubleshooting Chart ProblemcauseTractor - Model Number SchematicElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.272051 Chassis and Enclosures KEY Part Description Tractor - Model Number Chassis and EnclosuresTractor - Model Number Ground Drive Description KEY PartTractor - Model Number 917.272051 Steering Assembly KEY Part Description TRACTOR- Model Number Steering AssemblySpark Arrester TRACTOR-- Model NumberTRACTOR- Model Number Seat Assembly Wheels &TIRES DecalsTRACTOR- Model Number Lift Assembly Tractor - Model Number Mower Deck +-j,j+,. lNots Allcomponent dimensions givenin U.S. inches Peerless Transaxle - Model Number 206-545C 778345 @/---L Valve, exhaust Std Blower Housing and Baffles l AIR INTAKE/FILTRATION KEY Part Description Blower Housing & Baffles KEY Part DescriptionIGNITION/ELECTRICAL KEY Part Description Not Illustrated20\ Engine Controls KEY Starting System KEY Part DescriptionOIL PAN/LUBRICATION KEY Part Description Exhaust J Exhaust KEY Part Description Fuel System KEY Part DescriptionPage Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.272051 specifications

The Craftsman 917.272051 is a robust and versatile lawn tractor designed to meet the diverse needs of homeowners and landscape enthusiasts. With its powerful engine and user-friendly features, this model stands out in its class, providing a reliable solution for maintaining a pristine lawn.

One of the standout features of the Craftsman 917.272051 is its impressive 20 HP Briggs & Stratton engine. This air-cooled, single-cylinder engine is designed to deliver robust performance, making it easy to tackle a variety of mowing tasks. The engine's reliable starting system ensures minimal downtime, allowing users to efficiently manage their mowing schedule.

The cutting deck of the 917.272051 is another highlight, measuring 42 inches in width. This size strikes a balance between maneuverability and efficiency, enabling users to navigate tight spaces while still covering a generous amount of terrain in one pass. The deck also features a deck wash system, allowing for easy cleaning and maintenance after use, which helps extend its lifespan and maintain optimal performance.

Equipped with a 6-speed transmission, the Craftsman 917.272051 offers users the flexibility to choose the appropriate speed for various mowing conditions. This feature enhances control and allows for a smoother cutting experience, whether tackling overgrown grass or maintaining a manicured lawn.

Another significant aspect of the Craftsman 917.272051 is its comfortable, ergonomic design. The high-back seat provides ample support during extended mowing sessions, reducing fatigue and improving the overall experience. Additionally, the steering wheel is positioned to offer ease of handling, making it accessible even for users with less experience.

Safety features are also a priority in the design of the 917.272051. The tractor includes a built-in safety switch, which automatically disengages the blades when the operator leaves the seat. This feature adds a crucial layer of safety, protecting users from accidents while ensuring the mower functions efficiently.

Overall, the Craftsman 917.272051 lawn tractor combines power, performance, and user-friendly features, making it an excellent choice for homeowners seeking a dependable tool for lawn care. With its durable construction and advanced technologies, this model is equipped to handle the rigors of regular use, ensuring a well-maintained yard season after season.
Top Page Image Contents