Craftsman 917.272051 owner manual Mower should be properly leveled for, Mulching Mowingtips

Page 16

COLD WEATHER STARTING ( 50+ F and below)

6.When engine starts, allow engine to run with the throttle control in the

choke position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up pedod from several seconds to several minutes, depend-

ing on the temperature,

• The attachments can also be used dudng the engine warm-up period.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be

adjusted for best engine performance. See "TO ADJUST CARBURETOR" in the Service

and Adjustments section of this manual

MOWINGTIPS

Mower should be properly leveled for

best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual.

The left hand side of mower should be used for trimming.

E)dve so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the tractor.

This will result in a more even distribu-

tion of cltppings and more uniform cutting.

When mowing large areas, start by tuming to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the oppositedirection making left hand turns until finished.

If grass is extremely tall, it should be mowed twice to reduce load and

possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height.

Do not mow grass when it is wet, Wet grass wilt p_ug mower and {eave undesirable clumps. Allow grass to dry before mowing.

Always operate engine at full throttle when mowing to assure better mowing performance end proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as weir as the quality of cut desired.

When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

MULCHING MOWINGTIPS

IMPORTANT: For best performance, keep mower housing free of built+up grass and trash. Clean after each use.

The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades.

Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the eady afternoon. At this time the grass has dried and the newly cut area will not be exposed to the direct sun.

For best results, adjust the mower cutting height so that the mower cuts off only the top one-third of the grass blades, For extremely heavy mulching, reduce your width of cut on each pass and mew slewty.

Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpen- dicular to the first cut path.

Change your cutting pattern from week to week, Mow north to south one week

then change to east to west the next week. This will help prevent matting and graining of the lawn.

MaX 1/3"

16

Image 16
Contents Icraftsmanj Limited Twoyear Warranty on Craftsman Riding Equipment Parts Limited 90 DAY Warranty on BatterySerious injury or death General OperationWhile on the slope Follow the manufacturers recommen Do notIV. Service Adjust and service as requiredHi. Children Responsible adultSafety is Involved Product Specifications Park PlugRepair Agreement Customer ResponsibilitiesSteering Tools Required for Assembly Remove all accessible loose partsHowto SET Upyourtractor Check Battery Before Removingtractor from Skid Attach Steering WheelInstall Seat Adjust seat before tightening adjustment knobTo Drivetractor OFF Skid Operation section for location al function of controlsInstall Mulcher Plate R N H L Knowyourtractor Your Tractor Howto Useyourtractor To SET Parking Brake StoppingEngine To USE Throttle ControlTo Adjust Gauge Wheels Gauge WheelTo Operate Mower To Stop Mower BladesTowing Carts and Other Attachments Before Startingthe Engine Check Engine OIL LevelADD Gasoline To Start EngineMower should be properly leveled for MowingtipsMulching Mowingtips Maintenance Schedule Lubrication ChartGeneral Recommendations Before Each USETractor Clean AIR Screen Clean AIR INTAKE/COOLING AreasBelts Transaxle CoolingAIR Filter MufflerSpark Plugs Engine OIL FilterCleaning To Install MowerTo Remove Mower Raise attachment lift lever to its highest positionTo Level Mower Housing FRONT-TO-BACK AdjustmentOn level ground or driveway. Make sure JLiftLink Ustrnent NutBelt Installation To Adjust BrakeTo Replace Mower Blade Drive Belt Belt RemovalTo Start Engine with a Weak Battery Transaxle Gear Shift Lever Neutral AdjustmentTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-INJCAMBERReplacing Battery To Remove Hood and Grill AssemblyTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor AdjustingCable BracketBatfery Engine Fuel SystemEngineoil CylindersProblem Troubleshooting ChartCause Correction Troubleshooting Chart Problem Cause Troubleshooting Chart Problemcause CorrectionSchematic Tractor - Model NumberElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.272051 Chassis and Enclosures Tractor - Model Number Chassis and Enclosures KEY Part DescriptionTractor - Model Number Ground Drive KEY Part DescriptionTractor - Model Number 917.272051 Steering Assembly TRACTOR- Model Number Steering Assembly KEY Part DescriptionTRACTOR-- Model Number Spark ArresterTRACTOR- Model Number Seat Assembly Decals Wheels &TIRESTRACTOR- Model Number Lift Assembly +-j,j+,. l Tractor - Model Number Mower DeckNots Allcomponent dimensions givenin U.S. inches Peerless Transaxle - Model Number 206-545C 778345 @/---L Valve, exhaust Std Blower Housing and Baffles l Blower Housing & Baffles KEY Part Description IGNITION/ELECTRICAL KEY Part DescriptionNot Illustrated AIR INTAKE/FILTRATION KEY Part Description20\ OIL PAN/LUBRICATION KEY Part Description Starting System KEY Part DescriptionEngine Controls KEY Exhaust J Fuel System KEY Part Description Exhaust KEY Part DescriptionPage Page Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across HillGet it fixed, at your home or ours

917.272051 specifications

The Craftsman 917.272051 is a robust and versatile lawn tractor designed to meet the diverse needs of homeowners and landscape enthusiasts. With its powerful engine and user-friendly features, this model stands out in its class, providing a reliable solution for maintaining a pristine lawn.

One of the standout features of the Craftsman 917.272051 is its impressive 20 HP Briggs & Stratton engine. This air-cooled, single-cylinder engine is designed to deliver robust performance, making it easy to tackle a variety of mowing tasks. The engine's reliable starting system ensures minimal downtime, allowing users to efficiently manage their mowing schedule.

The cutting deck of the 917.272051 is another highlight, measuring 42 inches in width. This size strikes a balance between maneuverability and efficiency, enabling users to navigate tight spaces while still covering a generous amount of terrain in one pass. The deck also features a deck wash system, allowing for easy cleaning and maintenance after use, which helps extend its lifespan and maintain optimal performance.

Equipped with a 6-speed transmission, the Craftsman 917.272051 offers users the flexibility to choose the appropriate speed for various mowing conditions. This feature enhances control and allows for a smoother cutting experience, whether tackling overgrown grass or maintaining a manicured lawn.

Another significant aspect of the Craftsman 917.272051 is its comfortable, ergonomic design. The high-back seat provides ample support during extended mowing sessions, reducing fatigue and improving the overall experience. Additionally, the steering wheel is positioned to offer ease of handling, making it accessible even for users with less experience.

Safety features are also a priority in the design of the 917.272051. The tractor includes a built-in safety switch, which automatically disengages the blades when the operator leaves the seat. This feature adds a crucial layer of safety, protecting users from accidents while ensuring the mower functions efficiently.

Overall, the Craftsman 917.272051 lawn tractor combines power, performance, and user-friendly features, making it an excellent choice for homeowners seeking a dependable tool for lawn care. With its durable construction and advanced technologies, this model is equipped to handle the rigors of regular use, ensuring a well-maintained yard season after season.