Craftsman 917.27224 manual Lower seat into operating position and sit in seat

Page 9

4.Push down on seat to engage shoulder belt in slot and pull seat towards rear of tractor.

5.Pivot seat end pan forward and assemble adjustment knob and fiat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8, Get off seat without moving its adjusted position.

8.Raise seat and tighten adjustment knob securely.

Seat

Shoulder

Bo_t

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "transmis-

sion engaged" position.

4.Sit on seat in operating position, depress brake pedal and set the parking brake.

5.Press lift lever plunger and raise attachment lift lever to its highest position.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Release parking brake.

8.Slowly depress forward drive pedal and drive tractor off skid.

9.Apply brake to stop tractor and set parking brake.

10.Turn ignition key to "OFF" position. Continue with the instructionsthat follow.

ASSEMBLE GAUGEWHEELSTO MOWER DECK

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instructionbelow to remove the tractor

from the skid.

TO ROLLTRACTOR OFF SKID (See Operation section for location and function of controls)

1.Press lift lever plunger end raise attachment lift lever to its highest position.

2.Release parking brake by depressing brake pedal.

3.Place freewheel control in freewheel-

ing position to disengage transmis- sion (See _TO TRANSPORT" in the Operation section of this manual).

4.Roll tractorforward off skid.

TO DRIVETRACTOR OFF SKID (See Operation section for location and function of controls)

_WARNING: Before starting, read, understand and follow all instructionsin the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

The gauge wheels era designed to keep the mower deck in proper position when operating mower. Be sure they are propedy adjusted to ensure optimum

mower performance.

1.Slide gauge wheel bar down into bracket channel, Be sure that gauge wheel bar aligning holes ere on top. Assemble gauge wheels as shown using shoulder bolts, 3/8 washers and

3/8-16 center Iocknuts and tighten securely.

2.For ease of mower to tractor assem- bly, raise gauge wheels to highest position and retain with clevis pins

and spring retainers.

NOTE: Adjust gauge wheels before operating mower. See =TO ADJUST

GAUGE WHEELS" in the Operation section of this manual.

RetainerSpring.. //_/r.

Shoulder A(_justing_K_" "_'_

Gauge

_'/,'<_3IL'!

Wheel

3/8-16 Center

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Icrrftsmrni Safety Rules WarrantyProduct Specifications AssemblyII. Slope Operation General OperationIV. Service Never run a machine inside a clo= areaMower blades are sharp and can Cancer and birth defects or other repro- ductive harm Ifmachinestopswhilegoinguphill3ASOLINE 3.5 Gallons Product SpecificationsRepair Agreement Customer ResponsibilitiesSteering Wheel SeatSlope Sheet Howto SET Upyourtractor Check Battery Tools Required for AssemblyInstall Seat To Removetractor from Carton Unpack CartonLower seat into operating position and sit in seat Assemble Gaugewheelsto Mower DeckCenter Iocknuts and tighten securely Slide mower under tractor with Lock Ut B BracketLower mower linkage with attachment lift control Be sure belt tension rod is in disen- gaged positionCheck Deck Levelness Checktire PressureCheck for Proper Position of ALL Belts Check Brake SystemRRN Pedal Hourmeter Indicates hours of operation KnowyourtractorHowto Useyourtractor to SET Parking Brake To Adjust Mower Cutting HeightStopping Mower Blades Ground DriveTo Operate Mower To Adjust Gauge WheelsTo Stop Mower Blades To Operate on HillsADD Gasoline To Start EnginePulled out slightly Engine warm up periodPurgetransmission Free.wheellever while the engine is runningMaintenanceschedule Lubrication ChartGeneral Recommendations Before Each USETires BatteryOperator Presence System Blade CareEngine Lubrication To Clean Battery and TerminalsBelts Transaxle Pump FluidClean AIR INTAKE/COOLING Areas Clean AIR ScreenTo Service PRE-CLEANER To Service CartridgeAssembly section of this manual To Install MowerTractor To Remove MowerFRONT-TO-BACK Adjustment SIDE-TO-SIDE AdjustmentRaise mower to its highest position Both Front Links Must be Equal LengthRemove belt from electdc clutch pulley To Adjust BrakeCover Clutch Posin Idler To Replace Mower Blade Drive BeltTransmission REMOVAL/REPLACE- Ment To Adjust Steering Wheel ALIGN- MentTo Replace Motion Drive Belt Front Wheel TOE-IN/CAMBERReplacing Battery To Start Engine with a Weak BatteryTo Attachjumper Cables To Remove CABLES, Reverse OrderTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor Preliminary SettingRecheck idle speed. Readjust if necessary Final SettingWise 1 tum Acceleration TestTractor To Clean Battery and TermiEngine OIL CylindersCause Correction Troubleshoongchart ProblemProblem Troubleshooting ChartCause CorrectionOFF CauseSeatswitch TRACTOR-- Model Number SchematicTractor - Model Number Electrical KEY Part Description TRACTOR-- Model Number ElectricalTRACTOR- -MODELNUMBER917.272240 Chassisandenclosures Tractor - Model Number 9t7.272240 Chassis and Enclosures TRACTOR- -MODEL NUM BER Ground Drive 250 TRACTOR- Model Number Ground DriveTRACTOR- -MODEL Number Steering Assembly TRACTOR-- Model Number 917.272240 Steeringassembly TRACTOR- Model Number Engine Tractor - Model Number Engine KEY Part NO. NO. Description TRACTOR- Model Number Seat AssemblyDescription KEY Part TRACTOR- Model Number DecalsTractor - Model Number Liftassembly 37 123935X Plug Hole 38 17066516 Screw 5/16-18 x TRACTOR-- Model Number LiftassemblyTRACTOR- -MODEL Number Mowerdeck 5116-18 x 5/8 Tractor - Model Number MowerdeckOe oo 032 Ift22 KEY Part NO. no Description Descripon Blower Housing and Baffles Ignitionicharging KEY Part Description Starting System I Engine Controls KEY Part Description NO. no Crankshaft J Exhaustj Exhaust Page Page Page Suggested Guide for Sighting Slopes for Safe Operation Part Canada

917.27224 specifications

The Craftsman 917.27224 is a reliable and versatile riding lawn mower designed for homeowners seeking efficiency and comfort while maintaining their lawns. This model is known for its robust construction, innovative features, and user-friendly design, making it a popular choice among gardening enthusiasts.

One of the standout features of the Craftsman 917.27224 is its powerful engine. It is equipped with a dependable Briggs & Stratton engine, which provides ample horsepower for cutting through thick grass and tackling uneven terrain. This engine is designed for easy start-up and smooth operation, ensuring that mowing tasks can be completed efficiently.

The mower also boasts a 42-inch cutting deck, which allows for a wide swath of grass to be cut in a single pass. This feature not only saves time but also enhances the overall mowing experience. The cutting height can be easily adjusted to meet individual preferences and grass conditions, providing flexibility for different lawn types and seasons.

In terms of technology, the Craftsman 917.27224 includes an automatic transmission system that simplifies operation. Riders can shift gears effortlessly without the need for manual clutching, allowing for a smoother ride and more precise control over speed. This feature is particularly beneficial for users who may be new to riding mowers, as it enhances their confidence while operating the machine.

Comfort is also a priority with the Craftsman 917.27224. It features a comfortable, cushioned seat designed with ergonomics in mind, reducing fatigue during longer mowing sessions. Additionally, the mower is built with easy-to-access controls, allowing the operator to adjust settings or disengage the blades without hassle.

Safety features are not overlooked in this model. The mower comes with a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing accidental injuries. Furthermore, the durable construction of the Craftsman 917.27224 is designed to withstand the rigors of regular use, ensuring longevity and protecting the investment.

In conclusion, the Craftsman 917.27224 stands out in the riding mower market. With its powerful engine, wide cutting deck, user-friendly automatic transmission, and comfort-focused design, it meets the needs of homeowners looking for a reliable lawn maintenance solution. Its emphasis on safety and durability makes it a worthwhile choice for anyone wanting to keep their lawn in pristine condition.
Top Page Image Contents