Nilfisk-ALTO 3.4 user manual Number Of Presets 3 B 2 4 S 5 2 x 2 W + 2 M a, Example

Numbers 1, 2, 3, 4, 5 and 6 indicate the respective outputs.

In the example:

The signal connected to Input A is assigned to outputs 1 and 3. The signal connected to Input B is assigned to outputs 2 and 4.

The Sum of the signal on inputs A and B is assigned to outputs 5 and 6. The system is therefore configured as shown in the following diagram.

A13 B24 S56 2-WAY STEREO + 2 MONO AUX (2X2W + 2MAX)

LEFT	IN
	A

IN

A+B

RIGHT	IN
	B

OUT	HIGH LEFT
1
OUT	HIGH RIGHT
2
OUT	LOW LEFT
3
OUT	LOW RIGHT
4
OUT	MONO AUX L +R
5
OUT	MONO AUX L +R
6

4.5 Number Of PRESETS

A 1 3 B 2 4 S 5 6

2 F 2 x 2 W + 2 M A X

10 Factory PRESETS, 64 User PRESETS and 128 Card PRESETS are available.

4.6 Type of PRESET

A 1 3 B 2 4 S 5 6

2F 2 x 2 W + 2 M A X

There are 3 categories of PRESETS:

F = Factory PRESETS	factory programmed, cannot be permanently changed.
	These include all the system's usable configurations.
	These are the starting points for Creating User PRESETS and Card PRESETS
	from scratch.
U = User PRESETS	can be programmed by users.
C = Card PRESETS	can be programmed by users and stored on a Multimedia Memory Card.

4.7 Name of the PRESET

A 1 3 B 2 4 S 5 6

2 F 2 x 2 W + 2 M A X

In the example, the name indicates a two-way stereo system + two auxiliary mono outputs.

9