Assembly

Ref No.	Part Description	No Req.	Part No.
1	Window Assembly	1	31890
	Frame	-	31726
	Window Pane	-	31850
2	Pop Rivet	-	6T3954
2	Hex Nut 1/2" NC	8	21990
3	Lockwasher	8	21725
4	Capscrew 1/2" X 3" NC 4		21737
5	Bracket	2	31725
6	Capscrew 1/2"X 1-1/2"	4	21730
7	Bracket	2	31724
8	Bracket**	1	31944

WARNING ! All Tiger Boom Mowers mounted on Non-Cab Tractors require without exception a suitable Operator Protective Safety Screen be installed before operating to prevent Operator injury by objects thrown by the blades. The Operator Protective Safety Screen may be ordered with the machine or from the Extra Equipment Section (For your particular tractor, some modification to this Safety Screen may be necessary.)

A protective safety screen may be constructed and attached to the tractor and the tractor ROPS (Roll Over Protection System) only if it conforms to the following:

1.The Right side and top of the operators compartment must be completely protected as shown. In the case of a tractor with a ROPS mounted hard canopy, only the right side will need to be pro- tected.

2.Only use clamp type attachment on the ROPS. Do not drill, tap, or weld to the ROPS. You may (provided that it is strong enough) attach L-brackets to the fender and to the floor board, to secure the rest of the cage.

NOTE:

Tiger, cannot be held responsible for any injury resulting from the failure of any Owner/Operator con- structed Protective Safety Screens. The information provided here is only a guideline for the construction of a simple but effective operator protective structure which must be used with a ROPS for overturn protec- tion.

RBF - 14C 07-04	Assembly Section 3-15
© 2004 Alamo Group Inc.

RBF-14C specifications

The Tiger RBF-14C is a remarkable piece of engineering, designed for both performance and versatility in various demanding environments. This aircraft has gained recognition for its outstanding capabilities and is favored in a wide range of applications, including military operations, surveillance, and reconnaissance missions.

One of the primary features of the RBF-14C is its advanced propulsion system. Carefully crafted engines ensure high thrust and operational efficiency, allowing the aircraft to reach impressive speeds while maintaining fuel economy. This allows for extended range missions which is vital for operations requiring long flight durations without refueling.

The RBF-14C is equipped with a state-of-the-art avionics suite, incorporating the latest technologies in cockpit instrumentation. The digital displays provide pilots with crucial flight data and situational awareness, enhancing both safety and performance. This system integrates navigation, communication, and sensor data seamlessly, allowing for smooth operational command in challenging scenarios.

In terms of maneuverability, the RBF-14C is designed with advanced aerodynamics that optimize its performance in various flight conditions. The aircraft features a low-wing configuration, contributing to its agility and stability, making it adept at executing tight turns and rapid ascents. Such characteristics are particularly beneficial during aerial combat and evasive maneuvers.

Another significant aspect of the RBF-14C is its robust stealth capability. The airframe is designed to minimize radar cross-section and infrared signatures, enabling the aircraft to operate in contested environments while reducing the risk of detection. This stealth technology is crucial for missions requiring infiltration and precision strikes.

Moreover, the RBF-14C boasts enhanced payload capacity, allowing for the integration of a variety of munitions and sensors. This flexibility makes it suitable for diverse mission profiles, ranging from close air support to intelligence gathering. Pilots can quickly adapt the aircraft’s loadout based on mission requirements, contributing to its overall effectiveness.

Durability is another hallmark of the RBF-14C. Built with advanced composite materials, it can withstand harsh operational conditions, which enhances longevity and reduces maintenance needs. This reliability translates into lower operational costs over time, making it an advantageous choice for military and commercial operators alike.

In summary, the Tiger RBF-14C stands out as an exceptional aircraft, marked by its powerful engines, innovative avionics, exceptional maneuverability, stealth capabilities, diverse payload options, and durability. This combination of features solidifies its reputation as a leading aircraft in modern aviation, equipped to meet the challenges of today’s dynamic operational landscape.