Yazoo/Kees ZCBI48180 manual Check the Tire Pressure, Checklist

Page 10

ASSEMBLY

CHECK THE TIRE PRESSURE

Correct tire pressure is important for best cutting performance.

•Check the tire pressure and adjust accordingly. Refer to the “SPECIFICATIONS” section in this manual.

CHECKLIST

PLEASE REVIEW THE FOLLOWING

CHECKLIST

•All assembly instructions have been completed

•No remaining loose parts in crate

•Seat is adjusted properly and securely fastened

•All tires are properly inflated

•Check wiring. See that all connections are still secure, and wires are properly clamped.

•Before driving the mower, be sure the IZT(Integrated Zeroturn Transaxle) bypass linkages are in the drive position.

WHILE LEARNING HOW TO USE YOUR MOWER, PAY EXTRA ATTENTION TO THE FOLLOWING ITEMS:

•Engine oil is at proper level

•Fuel tank is filled with fresh, clean, regular unleaded gasoline. Check your engine manual for fuel requirements.

•Become familiar with all controls – their location and function. Operate them before you start the engine.

•Become familiar with unit operation on a flat and level area with the mower deck shut off.

•Be sure the brake system is in a safe operating condition. If adjustment is needed see Service and Adjustment section.

10

Image 10

Contents Operators Manual Models ZCBI48180Good Service Contents II. Slope Operation Safety RulesGeneral Operation Safe Operation Practices for RIDE-ON MowersIII. Children III. ServiceSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Specifications Customer ResponsibilitiesTo Remove the Mower from Crate AssemblyTools Required For Assembly Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureControls OperationIZT Integrated Zeroturn Transaxle Bypass Linkages Deck Blades HOW to USE Your MowerEngine To Adjust the Deck Cutting Height See Fig To Operate Mower To Adjust ANTI-SCALPRollers See Figure To Operate on HillsTo Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips General Recommendations Maintenance ScheduleBefore Each USE Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsMower Service and AdjustmentBefore Performing ANY Service or Adjustments To Level DeckTo Replace Deck Belt To Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Remove Wheels for Repair To Adjust the Seat See FigTo Adjust Control Levers See Fig Jump Starting EngineReplacing Battery See Fig To Adjust Park BrakeTracking Adjustment Fuel System BatteryStorage Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Attachment Poor cut unevenWiring Schematic