Yazoo/Kees ZCBI48180 AIR Filter, Engine OIL Filter, Spark Plugs, IN-LINE Fuel Filter See Figs

Page 22

CUSTOMER RESPONSIBILITIES

AIR FILTER

Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See Engine Manual.

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the mower is used more than 100 hours in one year.

ENGINE

FUEL FILTER

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. For spark plug type and gap setting refer to your ENGINE OWNER’S MANUAL.

IN-LINE FUEL FILTER (See Figs. 11 and 12)

The fuel filter should be replaced once each season. If the fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•First turn off the fuel valve that is located under the fuel tank of you mower.

•With the engine cool, remove the filter and plug fuel line sections.

•Place new filter in position in fuel line with arrow pointing toward the carburetor.

•Be sure there are no fuel leaks and clamps are secure and properly positioned.

•Immediately wipe up any spilled gasoline.

FIGURE 11

FUEL SHUT OFF

VALUE

FIGURE 12

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax

We do not recommend using a garden hose to clean you mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in the engine can shorten the engine life.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operators Manual Models ZCBI48180Good Service Contents II. Slope Operation Safety RulesGeneral Operation Safe Operation Practices for RIDE-ON MowersIII. Children III. ServiceSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Specifications Customer ResponsibilitiesTo Remove the Mower from Crate AssemblyTools Required For Assembly Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureControls OperationIZT Integrated Zeroturn Transaxle Bypass Linkages Deck Blades HOW to USE Your MowerEngine To Adjust the Deck Cutting Height See Fig To Operate Mower To Adjust ANTI-SCALPRollers See Figure To Operate on HillsTo Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips General Recommendations Maintenance ScheduleBefore Each USE Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsMower Service and AdjustmentBefore Performing ANY Service or Adjustments To Level DeckTo Replace Deck Belt To Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Remove Wheels for Repair To Adjust the Seat See FigTo Adjust Control Levers See Fig Jump Starting EngineReplacing Battery See Fig To Adjust Park BrakeTracking Adjustment Fuel System BatteryStorage Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Attachment Poor cut unevenWiring Schematic
Top Page Image Contents