OPERATION
CONTROLS
3
1
5
3
10
8
7
4
6
FIGURE 3
9
2
1.PTO SWITCH – Used to engage or disengage the deck blades.
2.FOOT PEDAL – Used to raise, lower and select various cutting heights of the deck.
3.CONTROL LEVERS – Sets the speed of the mower in both forward and reverse directions and turns the mower.
4.CHOKE CONTROL – Used when starting a cold engine.
5.THROTTLE CONTROL – Used to control Engine Speed.
6.IZT (Integrated Zeroturn Transaxle) BYPASS LINKAGES –
Bypasses IZT’s for pushing or pulling mower.
7.IGNITION SWITCH – Used to start or stop the engine.
8.PARKING BRAKE LEVER – Engages and disengages the park brakes.
9.TENSION RELIEF LEVER – Used to release the belt tension on the deck belt for ease in removing or replacing the belt.
10.HOUR METER – Indicates hours of operation.
11