Yazoo/Kees ZVKW52253, ZVKH61273 manual Safety Instructions, General Maintenance

Page 14
General Maintenance

SAFETY INSTRUCTIONS

Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

General Maintenance

Never operate machine in a closed area.

Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing.

If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

Never make any adjustments or repairs with the engine running.

Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

Maintain or replace safety and instruction labels, as necessary.

Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices.

Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components.

Be very careful when handling battery acid. Acid on skin can cause serious corrosive burns. If you spill battery acid on your skin, rinse immediately with water.

English-12

8011-515

Never drive the machine in an enclosed space

Always use protective glasses when handling the battery.

WARNING!

The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after handling the battery.

Image 14
Contents   Operator ManualEnglish  Page Contents OPERATOR’S MANUAL RIDER MAX 2 SERIESEnglish-2 Congratulations INTRODUCTIONIntroduction GeneralGood Service Manufacturing NumberSYMBOLS AND DECALS Symbols and DecalsRead General Operation SAFETY INSTRUCTIONSSafety Instructions English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Use protective goggles Transport Roll over Protection system ROPS Customer responsibilitiesControl Locations CONTROLSControls 4Reverse 1. Motion Control Levers1Forward 2Neutral 3Neutral slot, Neutral lock 4. Parking Brake 2. Hour Meter3. Tracking knob 7. Fuses 5. Blade switch6. Ignition Switch 8. Seat Locking Device 9. Refueling12. Choke Control 11. Seat Adjustment Lever10. Fuel Shut Off Valve 13. Throttle Control 14. Lifting Lever for the Mower DeckPump release valves AccessoriesCutting height pedal Tighten the valve moderatelyTraining OPERATIONOperation Starting the Engine Roll bar and safety beltBefore Starting 6.Move the throttle to the middle position 8.Open the fuel valve for the selected fuel tank OPERATION To start an engine with a weak battery Running Operating on hills Mowing Tips Mowing patternsStopping the Engine English-34 Moving by HandVent screw on the hydraulic pump 8011-507Maintenance Schedule MAINTENANCEMaintenance The parking brake is on The engine is stoppedThe ignition key has been removed Battery Ignition System Checking the Safety System English-40 Safety systemIgnition system 8011-553Checking the Engines Cooling Air Intake Checking and Adjusting the Throttle CableChecking and Adjusting the Choke Cable Air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking the V-belts Checking Tire PressuresChecking the Parking Brake Faulty adjustment can cause an accidentChecking the Blades Pump beltBlade replacement Adjusting the Mower Deck Engine oil cooler To adjust anti-scalprollersHardware Cleaning and WashingCaster Wheels Use protective glasses when cleaning and washingLubrication Schedule LUBRICATIONLubrication 1. Hydraulic System, Oil Level Lubricating the CablesShaft Bushings and Linkage Changing Oil and FiltersLUBRICATION Checking the Oil Level Oil Recommendations LUBRICATION 4.Throttle and Choke Cables, Lever Bearings 5. Front Wheel Mount7. Deck belt pulleys 8. Mower Deck Height Adjuster6. Front Wheel Bearings Lubricating the steering control shafts 9.Steering Control Shafts Tip the driver’s seat10. Mower Deck Struts Lubricating struts11. Changing the Oil Filter TROUBLE SHOOTING GUIDE Trouble Shooting GuideWrong fuel type Uneven mowing results Storage ServiceSTORAGE Winter StorageTECHNICAL DATA Technical DataProductivity Overall dimensionsEquipment ZVKH61303 ZVKH72303TECHNICAL DATA Accessories Torque SpecificationsUSA requirements CONFORMITY CERTIFICATESConformity Certificates Delivery Service SERVICE JOURNALService Journal After the First 8 Hours 5.Lubricate the belt adjuster, hydraulic pumps 25-HourService4.Lubricate the belt adjuster, mower deck 6.Check/clean the engine’s cooling air intake5.Lubricate the cutting height adjuster 50-HourService1.Perform the 25-hourservice 6.Check/adjust the parking brake100-HourService 300-HourService At Least Once Each Year English-78 Date, mtr reading, stamp, sign SERVICE JOURNALAction Date, mtr reading, stamp, sign SERVICE JOURNALAction Page 539 131260 IR 07/07
Related manuals
Manual 84 pages 62.74 Kb