Yazoo/Kees ZVKH61273, ZVKW52253 manual Stopping the Engine, Operation, Important Information

Page 35
Stopping the Engine

OPERATION

Stopping the Engine

Allow the engine to idle a minute in order to attain normal operating temperature before stopping it, if it has been worked hard. Avoid idling the engine for longer periods, as there is a risk of the spark plugs fouling.

1.Disengage the mower deck by depressing the blade switch.

8011-510

Disengage the mower deck

2.Raise the mower deck by pulling the lifting lever backward to the transport

position.

3.

When the machine is standing still,

 

 

activate the parking brake by pulling the

 

 

lever backward.

 

4.

Move the throttle to the minimum position

 

 

(tortoise symbol). Turn the ignition key to

 

 

the stop position. Never use choke to

 

 

stop engine.

 

5.

Move the steering controls outward.

 

6.

Remove key. Always remove key when

8011-552

Raise the mower deck with the lifting lever

 

leaving the mower to prevent

 

 

unauthorized use.

IMPORTANT INFORMATION

Leaving the ignition switch in any other position than "OFF" will cause the battery to be discharged.

English-33

Image 35
Contents   Operator ManualEnglish  Page OPERATOR’S MANUAL RIDER MAX 2 SERIES ContentsEnglish-2 General INTRODUCTIONIntroduction CongratulationsManufacturing Number Good ServiceSymbols and Decals SYMBOLS AND DECALSRead General Operation SAFETY INSTRUCTIONSSafety Instructions English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Use protective goggles Transport Customer responsibilities Roll over Protection system ROPSControl Locations CONTROLSControls 4Reverse 1. Motion Control Levers1Forward 2Neutral 3Neutral slot, Neutral lock 4. Parking Brake 2. Hour Meter3. Tracking knob 7. Fuses 5. Blade switch6. Ignition Switch 9. Refueling 8. Seat Locking Device12. Choke Control 11. Seat Adjustment Lever10. Fuel Shut Off Valve 14. Lifting Lever for the Mower Deck 13. Throttle ControlTighten the valve moderately AccessoriesCutting height pedal Pump release valvesTraining OPERATIONOperation Starting the Engine Roll bar and safety beltBefore Starting 6.Move the throttle to the middle position 8.Open the fuel valve for the selected fuel tank IMPORTANT INFORMATION To start an engine with a weak battery Running Operating on hills Mowing patterns Mowing TipsStopping the Engine 8011-507 Moving by HandVent screw on the hydraulic pump English-34Maintenance Schedule MAINTENANCEMaintenance The parking brake is on The engine is stoppedThe ignition key has been removed Battery Ignition System Checking the Safety System 8011-553 Safety systemIgnition system English-40Checking the Engines Cooling Air Intake Checking and Adjusting the Throttle CableChecking and Adjusting the Choke Cable Air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterFaulty adjustment can cause an accident Checking Tire PressuresChecking the Parking Brake Checking the V-beltsPump belt Checking the BladesBlade replacement Adjusting the Mower Deck To adjust anti-scalprollers Engine oil coolerUse protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication Schedule LUBRICATIONLubrication Changing Oil and Filters Lubricating the CablesShaft Bushings and Linkage 1. Hydraulic System, Oil LevelIMPORTANT INFORMATION Checking the Oil Level Oil Recommendations IMPORTANT INFORMATION 5. Front Wheel Mount 4.Throttle and Choke Cables, Lever Bearings7. Deck belt pulleys 8. Mower Deck Height Adjuster6. Front Wheel Bearings Lubricating struts 9.Steering Control Shafts Tip the driver’s seat10. Mower Deck Struts Lubricating the steering control shafts11. Changing the Oil Filter Trouble Shooting Guide TROUBLE SHOOTING GUIDEWrong fuel type Uneven mowing results Winter Storage ServiceSTORAGE StorageTechnical Data TECHNICAL DATAProductivity Overall dimensionsEquipment ZVKH72303 ZVKH61303Cutting width Torque Specifications AccessoriesUSA requirements CONFORMITY CERTIFICATESConformity Certificates Delivery Service SERVICE JOURNALService Journal After the First 8 Hours 6.Check/clean the engine’s cooling air intake 25-HourService4.Lubricate the belt adjuster, mower deck 5.Lubricate the belt adjuster, hydraulic pumps6.Check/adjust the parking brake 50-HourService1.Perform the 25-hourservice 5.Lubricate the cutting height adjuster100-HourService 300-HourService At Least Once Each Year English-78 Date, mtr reading, stamp, sign SERVICE JOURNALAction Date, mtr reading, stamp, sign SERVICE JOURNALAction Page 07/07 539 131260 IR
Related manuals
Manual 84 pages 62.74 Kb