CONTROLS
Cutting height pedal
On some models there is a deck assist lift pedal to aid in the lifting of the deck.
Pump release valves
IMPORTANT INFORMATION
Only rotate valve 1/4 - 1/2 turn to release system.
Tighten the valve moderately.
Do not overtighten the valve when closing. That can damage the valve seat.
Pump release valves are located at the pumps. They are used to release the system so the machine may be moved by hand when not running. Tilt seat forward to gain access to the pumps. Use a 5/8” wrench to open valve.
Accessories
For mulching, there is a BioClip attachment available. This is mounted underneath the mower deck and consists of control plates and BioClip blades.
Cutting height pedal
Pump release valve
BioClip attachment