CONTROLS
5. Blade switch
In order to engage the mower deck, pull the knob out; the mower blades are disengaged when the knob is depressed.
6. Ignition Switch
The ignition key is placed on the driver’s panel and is used to start and stop the engine.
IMPORTANT INFORMATION
Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before re- trying.
7. Fuses
The fuses are located in a holder to the left of the hydraulic tank. They are flat pin fuses of the same type used in automobiles.
There are three fuses, as well as socket for one spare fuse.
Fuse ratings and functions:
•20 A, Primary fuse.
•7.5 A, Mower deck coupling.
•7.5 A, Accessory outlet
•Socket for spare fuse.
Blade Switch
Ignition key and hour meter
Fuses |