GLOBUG LIGHTING SYSTEM — SHUTDOWN
Figure 18. Hot Lamp Surface
4.Using the mechanical winch (Figure 6, item 2), fully lower the mast.Turn winch handle
5.Using the adjustment lever (Figure 6, item 22) place the balloon/lamp assembly in the stow position.
6.Unzip the protective cover as shown in Figure 19, and place cover over balloon/lamp assembly.
Figure 19. Covering the Lamp/Balloon Assembly
7.To unlock outriggers, push downward on the counter- weight lever indicated by arrow (Figure 20). Grab hold of outrigger, pull upward, push down and place in stow position (Figure 21).
Figure 21. Outriggers (Stow Position)
8.Press down on the top of the brake pedal (Figure 22) and hold, then release. This action will
Figure 22. Parking Brake (Release Position)
Storage
1.Wipe and dirt or foreign matter that may have accumulated on the GloBug during operation. Use a mild detergent to clean the unit. DO NOT spray the engine with water.
2.Avoid storing the GloBug in areas that can be exposed to rain, harsh elements, and high humidity.
3.Place the GloBug in a clean dry location away from dirt and debris.
Figure 20. Outriggers (Released)
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 27